Hi
Help needed
I have a 1950 pan with a dry primo primary.
The question is on the s&S oil pump there is a Primary oil feed adjustment. should this be shut off, or is it needed to feed oil to the Timken bearing,
Thanks Barry
Primary oil feed on a primo belt system
Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
Please do not start new topics here, but here: New Panhead and Flathead topics
-
- Inactive member
- Junior Member
- Posts: 6
- Joined: Mon Oct 24, 2005 9:33 am
-
- Moderator
- Senior Member
- Posts: 8406
- Joined: Sat Nov 15, 2008 4:09 am
- Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
- Has thanked: 481 times
- Been thanked: 2956 times
Re: Primary oil feed on a primo belt system
Barry,
Shut it off, gently, so as not to damage the pump. It is only for the no longer there primary chain.The Timken is oiled internally by splash and vapor, no special feed to it!
Robbie
Shut it off, gently, so as not to damage the pump. It is only for the no longer there primary chain.The Timken is oiled internally by splash and vapor, no special feed to it!
Robbie
-
- Inactive member
- Junior Member
- Posts: 6
- Joined: Mon Oct 24, 2005 9:33 am