Pan58head
It looks like you have an electric start version of an 11 mm set-up.
The notations on the belt might indicate that it is a Primo Phase III kit but the 1G3 designation is a mystery to me.
I looked in the V-Twin Cat. and they list a 421/2" 96 tooth 11mm belt by Gates only difference is that the rear pully is rated at 44 teeth. Gates part # is 30884x1 1/2.
Great score for $50!! It will be worth the bit of work to get that ring gear off and a new belt.
King
Chain or belt
Opinions (chain od belt) are divided
-
- Inactive member
- Member
- Posts: 65
- Joined: Tue Feb 28, 2006 12:21 pm
Re: Chain or belt
Thanks King, I found the belt in teds also. Just curious why 44 teeth, mine is 45(counted it 3 times). As for the starter ring I'll machine that off on luch break at work. Just would like to figure outwho made this set up later SSB
-
- Senior Member
- Posts: 1333
- Joined: Mon Mar 11, 2002 5:11 pm
- Bikes: '46 Knuck. '57 Panhead, '59 Panhead
- Location: Repop Hell
- Has thanked: 1 time
- Been thanked: 9 times
- Contact:
Re: Chain or belt
1-1/2" x 11 mm. All the modern motor pulleys are 31 tooth. All the clutch shells are 47 tooth, to the best of my knowledge. Any other combinations "tended to tear up the belts" is what BDL® told me. My Primo® pulleys are 31 motor and 47 clutch. I'm going to try the 26-T trans sprocket and see if it's too tall at 62 mph. I'll be reporting back before too long. My name is Plumber and I've (fallen), forgotten my password (and I can't get up ;D) or log on.
-
- Senior Member
- Posts: 1333
- Joined: Mon Mar 11, 2002 5:11 pm
- Bikes: '46 Knuck. '57 Panhead, '59 Panhead
- Location: Repop Hell
- Has thanked: 1 time
- Been thanked: 9 times
- Contact:
Re: Chain or belt
Back...... .....with a new handle. My next project is to install Tedd heads on my Knuckle-Glide with upswept level shotguns and KH barrrel mufflers w/ pix. Huckin' A. Joes......I have a rolling chassis with brakes that woik Huckin' Joe's mama, I kain't find Finnerio..but no problem with a shutter button
-
- Senior Member
- Posts: 614
- Joined: Tue Jul 13, 2004 7:04 pm
- Bikes: 1949 FL Chopper
- Has thanked: 5 times
- Been thanked: 37 times
Re: Chain or belt
SuperMax Belt Drives offers 4 different primary drive ratios for pans and shovels. These are 1 1/2 x 14 mm belts.
37-27 1.37 to 1
38-27 1.40 to 1
37-25 1.48 to 1
38-25 1.52 to 1
-Craig
37-27 1.37 to 1
38-27 1.40 to 1
37-25 1.48 to 1
38-25 1.52 to 1
-Craig