[Wanted] intake

Plumber manifold

Post Reply
Andygears
Senior Member
Posts: 1396
Joined: Tue Feb 05, 2013 12:25 am
Bikes: 1950 panhead, 1999 FLHTCI, 1987 FLHTC custom
Location: Daytona Beach
Has thanked: 438 times
Been thanked: 648 times

[Wanted] intake

#1

Post by Andygears »

Hello, folks. At the recent AMCA meet in Daytona, I was lucky enough to buy a new/old pair of heads for my Panhead at a reasonable price. The threaded inserts into the heads are nice and tight, as are the rivets. So before doing the changeover from my old O-ring converted heads, I want to obtain a useable plumber style manifold. I need the 74 inch style that measures 3 5/8 end to end. So if anyone is holding and will part with theirs, I will pay a reasonable price.
I intend to get “PEEK” seals and Colony has new nuts if they are unusable on your manifold.

Thanks in advance,
Andygears
Andygears
Senior Member
Posts: 1396
Joined: Tue Feb 05, 2013 12:25 am
Bikes: 1950 panhead, 1999 FLHTCI, 1987 FLHTC custom
Location: Daytona Beach
Has thanked: 438 times
Been thanked: 648 times

Re: [Wanted] intake

#2

Post by Andygears »

Thanks, to everyone who looked but I’ve acquired a very nice manifold locally, from a friend, for a great price. Another building block supplied by a friend that I can realize how blessed I am to have a rolling shrine to buddies who helped through the years make my “Bitsa Bike” just right.

Andygears
Post Reply

Return to “Parts Wanted”