STARTER RING GEAR?

[nifty]

Found a genuine but 70 on so they wont fit 65-69 with stock primarys. Teeth on my chain side are getting pointy if ya get me. Dont trust Am although i saw on evolution industries i think? But big bucks to Au. I f i could post a pic of mine i would . Hey Roo can ya pm ya email address so i can show you.

If you are keen, you can cut through 70up ring gear welds, re-machine step on clutch basket/drum, & reweld ring gear.
But I prefer later OE or AM solid ring gears, they still shed small shrapnel into primary, but no big nasty pieces of busted up laminated ring gear.

Nifty

[RooDog]

Found a genuine but 70 on so they wont fit 65-69 with stock primarys. Teeth on my chain side are getting pointy if ya get me. Dont trust Am although i saw on evolution industries i think? But big bucks to Au. I f i could post a pic of mine i would . Hey Roo can ya pm ya email address so i can show you.

Andy....
Email with pics sent this morning.... RD....

[Hogey]

Thanks All

[panheadrider1961]

https://www.ebay.com/itm/155283807768

[RooDog]

https://www.ebay.com/itm/155283807768

That's funny!
Just some label stickers, no?

[Hogey]

The add says used and wont post a pic.

[RooDog]

He also says "NOS", and that usually means "New Old Stock", so, which is it?
I asked the seller if it was riveted or solid and got no response.
Very shaky seller whom I would avoid....
....RooDog....

[Hogey]

Got the same Vibes as Roo

[Hogey]

In the US a old bloke has a old dixe clutch shell for a 70 - says made in Tiawan. New old stock. He will send to Oz for 185$ Au
Any one have experience with Dixe clutch shell?

[Hogey]

I have ordered it'being a later 70 i will have to remove ring gear and set it up to 65-69 measurement . Let ya know how it goes. Any Tips greatly appreciated

[Hogey]

He cancelled my Order says ebay screwed up shipping.

[RooDog]

He cancelled my Order says ebay screwed up shipping.

I have sold a ton of items through eBay's Global Shipping with no issues. So, he is either lying, or incapable of telling the truth....
...Just my opinion..... RooDog.....

[Hogey]

I got a nice 70 on clutch shell and will need to remove and reposition ring gear. I have my old one for measurements i hope this is do able ?

[RooDog]

So, Hogey, the issue is not the ring gear but the clutch shell, basket, bell or whatever one wants to call it....
You need the correct 1965-69 part to install a ring gear to, no?

[Hogey]

Roo i purchased a 70 - 84 clutch shell with solid ring gear. The plan is to remove ring gear and move it to 65/69 specs i can use my old one for the measurement. Now how to do this? Remove material from shell. Option 1 but i dont want to cut into the holding rivet. So i may machine to the rivet then counter bore ring gear . I realise the ring gear will be hardened but done in a mill might do it. I will talk to my machinist . I wont receive basket till after Xmas and every thing shuts down hear anyway. Any thoughts advice thanks in advance.