I'm struggling to find out what socket is needed for the Turn-Indicator-Bulbs (#68572-64)
Is it BA15s ???
What Socket do Turn Indiactors have
-
- Member
- Posts: 170
- Joined: Sun Mar 27, 2022 6:22 pm
- Bikes: Royal Enfield Bullet Classic
1962 FLHF - Location: Frankfurt
- Has thanked: 108 times
- Been thanked: 11 times
-
- Senior Member
- Posts: 5327
- Joined: Tue Oct 31, 2017 1:00 pm
- Bikes: 1950 Panhead, Resto-Mod
1968 90", 5 Speed Shovelhead,
1984 Home Built Custom Evo 100" Bagger - Location: Knoxville, Tennessee
- Has thanked: 2801 times
- Been thanked: 2159 times
Re: What Socket do Turn Indiactors have
Single or dual contact.
I like the dual , #1157, light as it gives me both a low beam running light, and a brighter signal beam....
I like the dual , #1157, light as it gives me both a low beam running light, and a brighter signal beam....
-
- Moderator
- Senior Member
- Posts: 8403
- Joined: Sat Nov 15, 2008 4:09 am
- Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
- Has thanked: 481 times
- Been thanked: 2954 times
Re: What Socket do Turn Indiactors have
Not enough info in your post. Are you asking about a replacement socket for the die-cast signals as used through the 60s-70s era?DeltaElite wrote: ↑Mon Jun 20, 2022 2:24 pm I'm struggling to find out what socket is needed for the Turn-Indicator-Bulbs (#68572-64)
Is it BA15s ???
-
- Member
- Posts: 170
- Joined: Sun Mar 27, 2022 6:22 pm
- Bikes: Royal Enfield Bullet Classic
1962 FLHF - Location: Frankfurt
- Has thanked: 108 times
- Been thanked: 11 times
Re: What Socket do Turn Indiactors have
I am talking about the sockets in these:
What Bulbs would i need?
What Bulbs would i need?
- Attachments
-
- Screenshot_20220620-231735_eBay.jpg (95 KiB) Viewed 313 times
-
- Senior Member
- Posts: 5327
- Joined: Tue Oct 31, 2017 1:00 pm
- Bikes: 1950 Panhead, Resto-Mod
1968 90", 5 Speed Shovelhead,
1984 Home Built Custom Evo 100" Bagger - Location: Knoxville, Tennessee
- Has thanked: 2801 times
- Been thanked: 2159 times
Re: What Socket do Turn Indiactors have
Once again, is it a single or double contact socket. Straight or staggered locating pins?
Open it up and have a look-see inside.....
Open it up and have a look-see inside.....
-
- Member
- Posts: 170
- Joined: Sun Mar 27, 2022 6:22 pm
- Bikes: Royal Enfield Bullet Classic
1962 FLHF - Location: Frankfurt
- Has thanked: 108 times
- Been thanked: 11 times
-
- Moderator
- Senior Member
- Posts: 8403
- Joined: Sat Nov 15, 2008 4:09 am
- Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
- Has thanked: 481 times
- Been thanked: 2954 times
Re: What Socket do Turn Indiactors have
The original bub used in that light is a GE 63 6V. Any bulb conversion chart will give you options. It is a BA15s base bulb.
-
- Member
- Posts: 170
- Joined: Sun Mar 27, 2022 6:22 pm
- Bikes: Royal Enfield Bullet Classic
1962 FLHF - Location: Frankfurt
- Has thanked: 108 times
- Been thanked: 11 times
Re: What Socket do Turn Indiactors have
Thank You, that helps! Just wanted to make sure before ordering the bulbs.