Front tire change
-
- Member
- Posts: 39
- Joined: Fri Mar 14, 2014 9:55 pm
- Bikes: 1965 FL panhead
1947 FL knucklehead
1940 ULH flathead
1941 ULH flathead
1939 UH flathead - Location: oceanside new york
- Been thanked: 1 time
Front tire change
Had to change the tire on the front of wide glide. Is there a tourqe value for the front axle nut and the two nuts on the bottom clamp of the slider?
-
- Senior Member
- Posts: 5327
- Joined: Tue Oct 31, 2017 1:00 pm
- Bikes: 1950 Panhead, Resto-Mod
1968 90", 5 Speed Shovelhead,
1984 Home Built Custom Evo 100" Bagger - Location: Knoxville, Tennessee
- Has thanked: 2801 times
- Been thanked: 2159 times
Re: Front tire change
If you don't have factory specs, use these.....
https://i.stack.imgur.com/AbYnz.jpg
https://i.stack.imgur.com/AbYnz.jpg
-
- Senior Member
- Posts: 2090
- Joined: Fri Sep 21, 2007 3:03 am
- Bikes: '52 FL
'64 FLH - Has thanked: 164 times
- Been thanked: 519 times
Re: Front tire change
You probably won't be able to get an exact torque value on the axle nut, since you have to make sure the castellations line up with the hole in the axle, so you can put the cotter pin in.
And on the the bottom cap, remember that thos are 5/16 studs threaded into aluminum, so don't go too crazy on them!
And on the the bottom cap, remember that thos are 5/16 studs threaded into aluminum, so don't go too crazy on them!
-
- Site sponsor
- Senior Member
- Posts: 1921
- Joined: Fri Jul 01, 2011 8:43 pm
- Bikes: 1969 FLF
1937 EL
1940 U - Location: san diego
- Has thanked: 1478 times
- Been thanked: 244 times