Bike build from junked parts
Title problems
-
- Senior Member
- Posts: 1035
- Joined: Sun Sep 02, 2007 7:56 pm
- Bikes: 1922 J, 1922 JD, 1937 ULH, 1946FL 1948FL, 1957FL, 1960FLH, 1965XLCH, 1995 FLHT
- Location: Hoboken, NJ
- Been thanked: 126 times
- Contact:
Re: Bike build from junked parts
Vermont and all states require a vin number. Don't know where ya came up with that one.
-
- Senior Member
- Posts: 1407
- Joined: Tue Feb 05, 2013 12:25 am
- Bikes: 1950 panhead, 1999 FLHTCI, 1987 FLHTC custom
- Location: Daytona Beach
- Has thanked: 446 times
- Been thanked: 651 times
Re: Bike build from junked parts
Question, did your buddy ever have that pile you have registered, by any number, in any state? I think your problem is that you have no number at all plus no history. Which in many law enforcement states mean that the serial Numbered parts have been disposed of. And cannot be proven “not stolen”. Some number or identification must be established for the collection you have. Possibly buy a bent titled frame just for the paper, then stamp that number on the engine if the state will use it to register or create a “new construction” identification.
I have met people in your situation who have given up and parted out what they have to buy a basket case with good paper. Sounds like Missouri is a difficult DMV state.
Andygears
I have met people in your situation who have given up and parted out what they have to buy a basket case with good paper. Sounds like Missouri is a difficult DMV state.
Andygears
Re: Bike build from junked parts
One can not stamp a Harley VIN into aftermarket cases, well not legally anyway.
Without a factory VIN, you are opening a can of worms.
Without a factory VIN, you are opening a can of worms.
-
- Member
- Posts: 165
- Joined: Fri Feb 04, 2011 11:18 am
- Bikes: 1975 FL, 2005 RoadKing, 1949 Panhead
- Location: Missouri
- Has thanked: 2 times
- Been thanked: 7 times
Re: Bike build from junked parts
I looked at ebay harley paperwork and understand about titled cases. Although these are better options, both options seem to have considerable risk. I bought a set of trashed pan cases once only to find the numbers were bogus and altered. I ended up trading them off as I thought honesty is the best. Seems trying to be honest will surely include punishment.
How does one go about acquiring cases or title without getting ripped off? I'm not much of a savvy trader, just a mechanic.
How does one go about acquiring cases or title without getting ripped off? I'm not much of a savvy trader, just a mechanic.
-
- Member
- Posts: 165
- Joined: Fri Feb 04, 2011 11:18 am
- Bikes: 1975 FL, 2005 RoadKing, 1949 Panhead
- Location: Missouri
- Has thanked: 2 times
- Been thanked: 7 times
Re: Bike build from junked parts
Also found in Missouri, a motor change requires another Highway Patrol inspection and on a pre 70 harley, application for replacement VIN and installation by Highway Patrol.
Just gets more and more messy.
Just gets more and more messy.
-
- Site sponsor
- Senior Member
- Posts: 1160
- Joined: Tue May 25, 2004 3:47 am
- Bikes: 1959 Panhead FLH
- Has thanked: 18 times
- Been thanked: 152 times
Re: Bike build from junked parts
Might try to get a friend in another state title/register the parts in that state, then transfer the title to you in your state?
-
- Senior Member
- Posts: 2405
- Joined: Wed Jul 07, 2010 4:28 am
- Bikes: 1950Panhead
- Location: USA
- Has thanked: 1 time
- Been thanked: 366 times
Re: Bike build from junked parts
Post a photo here, I can tell you if the numbers are a factory stamp or altered.How does one go about acquiring cases or title without getting ripped off? I'm not much of a savvy trader, just a mechanic.
Re: Bike build from junked parts
If he had an aftermarket frame with an MSO, then he could go for a special construction title. He has an MSO for the aftermarket engine cases, he'd need one for the transmission though. But, he is not going to legally get a Harley titled motorcycle without an OEM left case with a factory VIN/title.
-
- Senior Member
- Posts: 1035
- Joined: Sun Sep 02, 2007 7:56 pm
- Bikes: 1922 J, 1922 JD, 1937 ULH, 1946FL 1948FL, 1957FL, 1960FLH, 1965XLCH, 1995 FLHT
- Location: Hoboken, NJ
- Been thanked: 126 times
- Contact:
Re: Bike build from junked parts
Clunker, nothing for nothing this thread is jack ass. You haven't told anybody here what year the bike is and haven't provided a photo of the vin or what you're working with. With this going forward how do you think anybody here can help you? Bob L
-
- Senior Member
- Posts: 5327
- Joined: Tue Oct 31, 2017 1:00 pm
- Bikes: 1950 Panhead, Resto-Mod
1968 90", 5 Speed Shovelhead,
1984 Home Built Custom Evo 100" Bagger - Location: Knoxville, Tennessee
- Has thanked: 2801 times
- Been thanked: 2159 times
-
- Senior Member
- Posts: 1407
- Joined: Tue Feb 05, 2013 12:25 am
- Bikes: 1950 panhead, 1999 FLHTCI, 1987 FLHTC custom
- Location: Daytona Beach
- Has thanked: 446 times
- Been thanked: 651 times
Re: Bike build from junked parts
It seems every state has differing rules for “legal” reconstruction of motorcycles. Many states don’t issue titles for bikes older than 19xx?. And in all probability, different “officials” from the same state have some leeway in allowing a reconstruction to become legal. So questioning an avenue of recourse is a good use of our forum.
A friend from Rhode Island bought a cone Shovel from a Connecticut police auction. The police/registry? there stamped lines thru the original number and stamped a new number, issued a title and sold it. While in Daytona, the bike was impounded as illegal. After a week of begging and showing all the Connecticut paper and RI registration, the police relented somewhat and allowed the bike to be torn apart, the offending double stamp case kept, and the rest of bike and parts returned to owner. What a fun bike week!
Andygears
A friend from Rhode Island bought a cone Shovel from a Connecticut police auction. The police/registry? there stamped lines thru the original number and stamped a new number, issued a title and sold it. While in Daytona, the bike was impounded as illegal. After a week of begging and showing all the Connecticut paper and RI registration, the police relented somewhat and allowed the bike to be torn apart, the offending double stamp case kept, and the rest of bike and parts returned to owner. What a fun bike week!
Andygears
-
- Member
- Posts: 165
- Joined: Fri Feb 04, 2011 11:18 am
- Bikes: 1975 FL, 2005 RoadKing, 1949 Panhead
- Location: Missouri
- Has thanked: 2 times
- Been thanked: 7 times
Re: Bike build from junked parts
Not trying to start a "jack ass" thread. I'm a novice at these legal issues and have received a lot of opinions about various options. I very much appreciate the constructive advice and opinions..
In my case, without knowing the titling issues, I built a full panhead bobber using my deceased friends original 1955 straight leg frame (raked out to 45 degrees -major work to put back to original) and junked damaged parts from friends and a newly constructed 80 ci motor with s&s cases. I kept bills of sale for all used parts and new parts in a book and thought it would be sufficient. I thought I could at least get a reconstruction title if I showed the parts were not stolen. It turns out to be very difficult primarily because laws are written assuming frames are registered with a vin. Not a lot of room for antique barn find parts or even parts kept for years from friends.
I will continue to work on this but should close this thread. Just thought there may be someone else out there doing or attempting to build a bike as I did.
In my case, without knowing the titling issues, I built a full panhead bobber using my deceased friends original 1955 straight leg frame (raked out to 45 degrees -major work to put back to original) and junked damaged parts from friends and a newly constructed 80 ci motor with s&s cases. I kept bills of sale for all used parts and new parts in a book and thought it would be sufficient. I thought I could at least get a reconstruction title if I showed the parts were not stolen. It turns out to be very difficult primarily because laws are written assuming frames are registered with a vin. Not a lot of room for antique barn find parts or even parts kept for years from friends.
I will continue to work on this but should close this thread. Just thought there may be someone else out there doing or attempting to build a bike as I did.
-
- Senior Member
- Posts: 609
- Joined: Tue Feb 21, 2017 12:32 am
- Bikes: 1961 fl 1976 fxe
- Location: macon georgia
- Has thanked: 83 times
- Been thanked: 193 times
Re: Bike build from junked parts
post #17 andygears agree with any old tag from the state? old insurance card? that is why you need vin traceable stolen property by insurance company you could apply for abandoned status but still need vin ,dont know any insurance company that would insure without traceable vin ,yes 1955 is over 20 years old no title most states ,bill of sale would be legal, but no vin no forward movement that i know of that is what its about stolen property
Re: Bike build from junked parts
You do not have the original left case/VIN, so it's a moot point.
What you have is a frame with no numbers because it's a Panhead era frame. You have aftermarket cases with an MSO.
You can not title this as a Harley Panhead, it's going to be a special construction. The problem you're going to run into is that you do not have a frame with an MSO/serial number.
In my opinion, your best bet is to buy an aftermarket frame and get it titled as a special construction.
OR
Buy a left case/title and title/register it and there you go.
What you have is a frame with no numbers because it's a Panhead era frame. You have aftermarket cases with an MSO.
You can not title this as a Harley Panhead, it's going to be a special construction. The problem you're going to run into is that you do not have a frame with an MSO/serial number.
In my opinion, your best bet is to buy an aftermarket frame and get it titled as a special construction.
OR
Buy a left case/title and title/register it and there you go.
-
- Site sponsor
- Senior Member
- Posts: 659
- Joined: Sun Oct 17, 2010 1:00 am
- Bikes: 1995 fxsts,1963 fl project in progress
- Location: Patten,maine
- Has thanked: 121 times
- Been thanked: 101 times
Re: Bike build from junked parts
Who would you go to for an aftermarket frame and an MSO. If I need to go that route?