45 front brake stabilizer plate
-
- Member
- Posts: 17
- Joined: Wed Nov 14, 2018 2:33 am
- Bikes: 1943 Harley 42WLA
- Location: new york
- Been thanked: 5 times
45 front brake stabilizer plate
What would happen if the front brake stabilizer plate is not is not fitted over the over the extended button end of the left front rocker plate stud and the bike was driven?
-
- Moderator
- Senior Member
- Posts: 8414
- Joined: Sat Nov 15, 2008 4:09 am
- Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
- Has thanked: 484 times
- Been thanked: 2958 times
Re: 45 front brake stabilizer plate
Nothing. You will end up with excessive wear in the bushing over time, but short term there would be zero effect except the possibility of shearing off the studs on a large bump which forces the plate against them. When properly installed the slots are in about the middle of their opening range.