Front fork drain leak FLH
Leaking from drain screw
-
- Member
- Posts: 299
- Joined: Sat Aug 19, 2017 12:52 pm
- Bikes: 1951 servi, 82 FLH, 2011 FLHR,
- Has thanked: 4 times
- Been thanked: 16 times
Front fork drain leak FLH
I recently rebuilt the front forks on my 1982 FLH. I put in new Colony brand screws and the new copper washers that came with the screw for the drain holes. It seems that after adding the oil both the screws leaked. I tightened both screw but didn't want to get stupid with to torque. One seems to have stopped but the other still leaked. I removed the screw and drained the oil. Inspected the screw head, washer and the fork surface and nothing looks knicked. Just wondering if someone else has experienced this and a remedy. I have another new washer, maybe hone on the fork surface. The sliders were recently chromed.
-
- Site sponsor
- Senior Member
- Posts: 1922
- Joined: Fri Jul 01, 2011 8:43 pm
- Bikes: 1969 FLF
1937 EL
1940 U - Location: san diego
- Has thanked: 1478 times
- Been thanked: 243 times
Re: Front fork drain leak FLH
have no idea if the re-chroming has any influence, but could be. Gasket goop,/silicone comes to mind.
-
- Senior Member
- Posts: 826
- Joined: Tue Nov 18, 2008 7:33 pm
- Bikes: 1952 FL
2020 Honda Super Cub - Location: Estero Florida
- Has thanked: 49 times
- Been thanked: 57 times
Re: Front fork drain leak FLH
A drop of Permatex Industrial Hydraulic sealer on the threads will do the trick. Its good for all fluid connections too.
Jim M
Jim M
-
- Member
- Posts: 299
- Joined: Sat Aug 19, 2017 12:52 pm
- Bikes: 1951 servi, 82 FLH, 2011 FLHR,
- Has thanked: 4 times
- Been thanked: 16 times
Re: Front fork drain leak FLH
I agree with the chromeing being at least part of the problem . It didn't leak before. Not sure about silicone. I will look into the hydro sealer as far as applications. I believe some of the panheads had a tapered plug, a little teflon would help a lot. My shovelhead has a copper washer and button head screw. Thanks
Re: Front fork drain leak FLH
An 82 has Showa forks, which use a button head screw and copper washer. The screw isn't tapered like the earlier allen plug, used thru 76.
VPH-D
VPH-D
-
- Member
- Posts: 299
- Joined: Sat Aug 19, 2017 12:52 pm
- Bikes: 1951 servi, 82 FLH, 2011 FLHR,
- Has thanked: 4 times
- Been thanked: 16 times
-
- Member
- Posts: 299
- Joined: Sat Aug 19, 2017 12:52 pm
- Bikes: 1951 servi, 82 FLH, 2011 FLHR,
- Has thanked: 4 times
- Been thanked: 16 times
Re: Front fork drain leak FLH
This is the product that was available. It seems like it doesn't have fibers or anything like that which is similar to the industrial sealer. Clean up is nice also. I guess I will be the Guinea pig