I have a seat T that came off a 59 Pan but I can't identify it.....no numbers apart from a '1' and what looks like the letter 'C'
It also had the 3/8 front bush with a 5/16 bolt in it so none of that adds up.
I have added a few pics so if anyone can identify it I would be very happy, thanks.
Seat T Identification
-
- Senior Member
- Posts: 2405
- Joined: Wed Jul 07, 2010 4:28 am
- Bikes: 1950Panhead
- Location: USA
- Has thanked: 1 time
- Been thanked: 366 times
Re: Seat T Identification
Original tee have xe-39 or 51912-35 casting number.
My guess is reproduction or post panhead.
My guess is reproduction or post panhead.
-
- Member
- Posts: 76
- Joined: Tue Jan 13, 2009 12:15 am
- Bikes: 56 Pan Bobber
2008 Ducati Monster S4r - Location: Brisbane, Australia
- Been thanked: 6 times
Re: Seat T Identification
Thanks for the reply guys, I did suspect it was post pan, early shovel, I think they didn't have casting numbers, but it does have some identifying marks.
That makes me think its not a repo, they have no marks at all and the patina says its old.
Also it had the 3/8" bolt bush which also places it in the later version, '66 and up?? Not familiar with those years.
The friend I got it off also had an earlier xe39 version so i will go back and compare the two.
That makes me think its not a repo, they have no marks at all and the patina says its old.
Also it had the 3/8" bolt bush which also places it in the later version, '66 and up?? Not familiar with those years.
The friend I got it off also had an earlier xe39 version so i will go back and compare the two.