star hub pieces
-
- Member
- Posts: 56
- Joined: Sun Oct 16, 2016 3:18 pm
- Bikes: 1947 EL, 1956 FL, 1958 FLH, 1986 FXRD, 2017 FLHXSE
- Location: Chandler AZ
- Has thanked: 2 times
- Been thanked: 1 time
star hub pieces
Hi all, I took apart my star hub for maintenance and have a question maybe ya'll can help me with. I do not seem to have PN 43561-39 "inside hub bearing thrust collar" . Palmers book made no reference to it. It shows in my '49-'57 book though. Is this pressed in to the hub already?
You do not have the required permissions to view the files attached to this post.
-
- Senior Member
- Posts: 2405
- Joined: Wed Jul 07, 2010 4:28 am
- Bikes: 1950Panhead
- Location: USA
- Has thanked: 1 time
- Been thanked: 366 times
-
- Former member
- Senior Member
- Posts: 2789
- Joined: Tue Dec 18, 2007 2:10 pm
- Bikes: 1941/59 EL
1952 FL
1977 FLH
1994 Fatboy - Has thanked: 22 times
- Been thanked: 110 times
Re: star hub pieces
It's a light press fit, and seldom is removed when simply cleaning up the internals. If you're rebuilding your hub, just make sure it is fully seated into the bore. A socket of an appropriate size works well.
I have seen these loose in the bore, on rare occasions.
I have seen these loose in the bore, on rare occasions.