pauchgo exhaust

Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
weiner69hd
Member
Posts: 14
Joined: Thu Jul 07, 2016 6:21 pm
Bikes: 1969xlch; 1977xlh;1976fxe;1998fatboy;1960flh
Location: iowa
Been thanked: 2 times

pauchgo exhaust

#1

Post by weiner69hd »

Will the 2 into 1 exhaust from pauchgo bolt right up to my 1960 flh?? I;m looking at the JP Cycles has. Will it fit between the frame and motor without any trouble? This is my first pan project; any help will be appreciated....
Buddhahoodvatoloco
Site sponsor
Site sponsor
Senior Member
Posts: 1916
Joined: Fri Jul 01, 2011 8:43 pm
Bikes: 1969 FLF
1937 EL
1940 U
Location: san diego
Has thanked: 1475 times
Been thanked: 241 times

Re: pauchgo exhaust

#2

Post by Buddhahoodvatoloco »

Post up the Paughco part #, the years that it will fit should be listed, I have never ever bought anything from JP Cycles so I am not familiar with their format.
If it has a squash pipe, it should work. Are you running rear crash bars.
VPH-D
Senior Member
Posts: 922
Joined: Tue Feb 01, 2005 1:00 am
Been thanked: 76 times

Re: pauchgo exhaust

#3

Post by VPH-D »

I have 2 rigid Pans with Paughco 2 into 1 exhaust systems. Each required a little fiddling to fit.
VPH-D
Post Reply

Return to “Exhaust”