pauchgo exhaust
Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
Please do not start new topics here, but here: New Panhead and Flathead topics
-
- Member
- Posts: 14
- Joined: Thu Jul 07, 2016 6:21 pm
- Bikes: 1969xlch; 1977xlh;1976fxe;1998fatboy;1960flh
- Location: iowa
- Been thanked: 2 times
pauchgo exhaust
Will the 2 into 1 exhaust from pauchgo bolt right up to my 1960 flh?? I;m looking at the JP Cycles has. Will it fit between the frame and motor without any trouble? This is my first pan project; any help will be appreciated....
-
- Site sponsor
- Senior Member
- Posts: 1922
- Joined: Fri Jul 01, 2011 8:43 pm
- Bikes: 1969 FLF
1937 EL
1940 U - Location: san diego
- Has thanked: 1478 times
- Been thanked: 243 times
Re: pauchgo exhaust
Post up the Paughco part #, the years that it will fit should be listed, I have never ever bought anything from JP Cycles so I am not familiar with their format.
If it has a squash pipe, it should work. Are you running rear crash bars.
If it has a squash pipe, it should work. Are you running rear crash bars.
Re: pauchgo exhaust
I have 2 rigid Pans with Paughco 2 into 1 exhaust systems. Each required a little fiddling to fit.
VPH-D
VPH-D