Could someone post pics on where the rear crash guard mount on a 59 Flh?
Please and thx!!!!
Rear crash guard mounting on a 59
-
- Junior Member
- Posts: 6
- Joined: Sat Mar 27, 2010 4:28 am
- Bikes: 74 Moto Guzzi
69 XLCH
98 BMW
72 Bultaco
77 TT500
78 RD400
72 CB350
81 Montesa
78 CB550 - Location: Vancouver, BC
Re: Rear crash guard mounting on a 59
First photo is lower left side...with or without center stand or left side muffler support bracket for dual exhaust. The crash bars mount on the inside of the frame on the rear tabs on either side. Mounting on the inside allows for the muffler support bracket for either side.
Second photo here is lower right side with the muffler support bracket for 2 in 1 exhaust:
The upper mounting locations should be obvious. A 3/8" inch threaded rod can be used through the tube in the frame under the seat and just in front of the fender, but I didn't have a picture of that handy. Hope this helps.
Second photo here is lower right side with the muffler support bracket for 2 in 1 exhaust:
The upper mounting locations should be obvious. A 3/8" inch threaded rod can be used through the tube in the frame under the seat and just in front of the fender, but I didn't have a picture of that handy. Hope this helps.
-
- Junior Member
- Posts: 6
- Joined: Sat Mar 27, 2010 4:28 am
- Bikes: 74 Moto Guzzi
69 XLCH
98 BMW
72 Bultaco
77 TT500
78 RD400
72 CB350
81 Montesa
78 CB550 - Location: Vancouver, BC
-
- Member
- Posts: 95
- Joined: Fri Feb 19, 2010 11:08 pm
- Bikes: 1960 FLHF
1975 FLHP - Location: Colorado
- Has thanked: 5 times
- Been thanked: 7 times
Re: Rear crash guard mounting on a 59
Thanks jed! Putting my 60 back together and this saved me considerable time.