Speedometer housing

Post Reply
dontsink
Member
Posts: 438
Joined: Tue Apr 29, 2014 12:41 pm
Bikes: 1957 FL, Vespa PX200
Has thanked: 93 times
Been thanked: 33 times

Speedometer housing

#1

Post by dontsink »

Hi Gents,

Finally i found someone who does cadminum plating here in europe but unfortunately during the plating process the part on the speedo housing where the reset knob goes thru dissapeared :-(
This part is riveted to the housing body with two small rivets. Now i am trying to get this little part. Can anyone help where i could get it? I am an idiot not to remove it before the plating but now it is too late.

Thank you!
Thomas
hydra74
Moderator and Panhead Register Member
Senior Member
Posts: 894
Joined: Mon Apr 03, 2006 12:50 pm
Bikes: 1943 WLC,1955 FL
Has thanked: 101 times
Been thanked: 161 times

Re: Speedometer housing

#2

Post by hydra74 »

Thomas, maybe the H-D speedo repair shop can help

Hydra74

http://www.hd-speedometer-repair-shop.com/" onclick="window.open(this.href);return false;
dontsink
Member
Posts: 438
Joined: Tue Apr 29, 2014 12:41 pm
Bikes: 1957 FL, Vespa PX200
Has thanked: 93 times
Been thanked: 33 times

Re: Speedometer housing

#3

Post by dontsink »

Thanks to Perry i have found a replacement for the casting.

Thomas
Post Reply

Return to “Speedometer, Dashboard & Instruments”