Compression Question
Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
Please do not start new topics here, but here: New Panhead and Flathead topics
-
- Former member
- Senior Member
- Posts: 3336
- Joined: Sat Jun 26, 2010 1:54 pm
- Bikes: 1958flh 1969sporty,had a knuckle but sold back to original owner
- Location: NEW JERSEY
- Has thanked: 195 times
- Been thanked: 278 times
Re: Compression Question
Guys---I think It was misunderstood on my part!--Putting air in the heads with the p-rods out --You want to hear it out the timing hole/Afterall its going to follow the least restriction.Its when you hear it out the carb. or pipe is what I was meaning to emphasize on.Yes Rubone a Leakdown is the way to go-I agree.The leakdown will give you a pretty good understanding of just how bad the rings are ,or piston wear,etc.--Respectfully---Richie
-
- Member
- Posts: 100
- Joined: Fri Jan 01, 2010 4:04 pm
- Bikes: '03 Fatboy
'14 Slim
'60 FLH
86 XT 350 - Location: St. Louis
- Been thanked: 2 times
Re: Compression Question
She's Alive!!
Thanks guys for all your help.
Today I put the push rods back in and adjusted the clutch so that the points cam rotated the whole time while rotating the engine, put 10 squirts of fuel through the Mikuni carb, primed her and she fired right up. After 20 years of spending time in boxes and grates my Pandora is alive.
I still have a long way to go to make her road worthy but at least her hearts pumping.
Thank you gentlemen for all your help. I couldn't have done it without it.
I owe you all a cold one or six...
Kirk
Thanks guys for all your help.
Today I put the push rods back in and adjusted the clutch so that the points cam rotated the whole time while rotating the engine, put 10 squirts of fuel through the Mikuni carb, primed her and she fired right up. After 20 years of spending time in boxes and grates my Pandora is alive.
I still have a long way to go to make her road worthy but at least her hearts pumping.
Thank you gentlemen for all your help. I couldn't have done it without it.
I owe you all a cold one or six...
Kirk