UL cams
-
- Member
- Posts: 264
- Joined: Sat Oct 06, 2007 3:18 pm
- Bikes: 41 WLD, 47 WL, 51 G, 48 S, 53 STX, 55B, 56 ST, 57 FLH,60 BT, 61 BT, 62BTH
- Been thanked: 4 times
UL cams
wh's hoardin' all the UL cams? Lienweber says he will be doing a regrinding run in 3 weeks, then 5 months later. I need a good #1 and a good #3 UL cam. anyone got either or both for sale or trade?
-
- Moderator
- Senior Member
- Posts: 8406
- Joined: Sat Nov 15, 2008 4:09 am
- Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
- Has thanked: 481 times
- Been thanked: 2956 times
Re: UL cams
Ul Cams are always thin on the ground. I am always looking for them and rarely find a good one, but I see lots of junk ones. Some may be regrind donors, most are not due to gear pitting and worn shaft conditions.thepigstye wrote: ↑Fri Oct 28, 2022 11:38 pm wh's hoardin' all the UL cams? Lienweber says he will be doing a regrinding run in 3 weeks, then 5 months later. I need a good #1 and a good #3 UL cam. anyone got either or both for sale or trade?
-
- Member
- Posts: 264
- Joined: Sat Oct 06, 2007 3:18 pm
- Bikes: 41 WLD, 47 WL, 51 G, 48 S, 53 STX, 55B, 56 ST, 57 FLH,60 BT, 61 BT, 62BTH
- Been thanked: 4 times
Re: UL cams
Shafts can be replaced. Pitted gears aint good tho. I bought a pile of 45 cams,oil pumps and lifter blocks along with a pile of valve covers and pre 49 timers at a swap meet 2 weeks ago for a song. Found one really nice UL front exhaust cam and a super nice set and 2 extra 39-48 UL lifter blocks