74/80 pinion gear seal ring dimensions
-
- Member
- Posts: 264
- Joined: Sat Oct 06, 2007 3:18 pm
- Bikes: 41 WLD, 47 WL, 51 G, 48 S, 53 STX, 55B, 56 ST, 57 FLH,60 BT, 61 BT, 62BTH
- Been thanked: 4 times
74/80 pinion gear seal ring dimensions
Can anyone give me the basic measures of this seal ring? Thanks
-
- Moderator
- Senior Member
- Posts: 8413
- Joined: Sat Nov 15, 2008 4:09 am
- Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
- Has thanked: 484 times
- Been thanked: 2958 times
Re: 74/80 pinion gear seal ring dimensions
'37-'39 are different than '40-'48. Which are you looking for?
-
- Member
- Posts: 264
- Joined: Sat Oct 06, 2007 3:18 pm
- Bikes: 41 WLD, 47 WL, 51 G, 48 S, 53 STX, 55B, 56 ST, 57 FLH,60 BT, 61 BT, 62BTH
- Been thanked: 4 times
-
- Senior Member
- Posts: 539
- Joined: Wed Dec 14, 2011 7:04 am
- Bikes: 1948 Pan 61
1942 sv 74 x 4
1948 sv 74 x 1
1943 42U + sidecar with 6800 miles on the clock from new. - Location: South Africa
- Been thanked: 109 times
Re: 74/80 pinion gear seal ring dimensions
The OD is 43 mm , ID is 21.5 mm , Width at the raised centre 6.35 mm & then 2 tags 4.5 mm tall.
Flatboy.
Flatboy.
-
- Senior Member
- Posts: 539
- Joined: Wed Dec 14, 2011 7:04 am
- Bikes: 1948 Pan 61
1942 sv 74 x 4
1948 sv 74 x 1
1943 42U + sidecar with 6800 miles on the clock from new. - Location: South Africa
- Been thanked: 109 times
Re: 74/80 pinion gear seal ring dimensions
Thickness of the washer part 1.9 mm steps down to 1.5 mm.
Flatboy.
Flatboy.
-
- Member
- Posts: 264
- Joined: Sat Oct 06, 2007 3:18 pm
- Bikes: 41 WLD, 47 WL, 51 G, 48 S, 53 STX, 55B, 56 ST, 57 FLH,60 BT, 61 BT, 62BTH
- Been thanked: 4 times