Cylinder head bolts
This one with the threaded hole
-
- Member
- Posts: 449
- Joined: Mon Aug 05, 2019 8:07 pm
- Bikes: 1948 G 45", 1969 FLH, 1963 FLH, 1965 FLH
- Location: LA
- Has thanked: 243 times
- Been thanked: 99 times
Cylinder head bolts
What’s this threaded hole for?
- Attachments
-
- 2FBCFA08-B277-458E-A63C-5436AA4219E5.jpeg (99.03 KiB) Viewed 332 times
-
- Moderator
- Senior Member
- Posts: 8406
- Joined: Sat Nov 15, 2008 4:09 am
- Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
- Has thanked: 481 times
- Been thanked: 2956 times
Re: Cylinder head bolts
It is for the WLA "fording kit" (for deep water) and is in the wrong location. Without the kit it doesn't matter where it is but it goes in the front just right of the centerline.
-
- Member
- Posts: 449
- Joined: Mon Aug 05, 2019 8:07 pm
- Bikes: 1948 G 45", 1969 FLH, 1963 FLH, 1965 FLH
- Location: LA
- Has thanked: 243 times
- Been thanked: 99 times
Re: Cylinder head bolts
Great to know. I figured it was a WLA thing. The engine they came from likely a WLA engine.
-
- Senior Member
- Posts: 580
- Joined: Wed Aug 13, 2014 8:27 pm
- Bikes: WLA
- Has thanked: 58 times
- Been thanked: 145 times
Re: Cylinder head bolts
As Robbie mentioned, it's for bolting the 'deep water breather pipe' onto the headbolt..
It was a retrofit to earlier types WLA; type VII WLAs had them 'off the line'.
It was a retrofit to earlier types WLA; type VII WLAs had them 'off the line'.
-
- Moderator
- Senior Member
- Posts: 3713
- Joined: Mon Dec 01, 2003 11:38 pm
- Bikes: '42 WLA X 2, '55FL, '93 Ultra Classic, '91 Fatboy, '97 883, '03 Rokon Trailbreaker, '83 GPz 750.
- Has thanked: 71 times
- Been thanked: 128 times
Re: Cylinder head bolts
Fun trivia:
The clean out plug on the fording tube is the same as the dashboard bolt on a panhead.
John
The clean out plug on the fording tube is the same as the dashboard bolt on a panhead.
John