58-84 Seat Post Install Tool

Post Reply
VintageTwin
Senior Member
Posts: 1330
Joined: Mon Mar 11, 2002 5:11 pm
Bikes: '46 Knuck. '57 Panhead, '59 Panhead
Location: Repop Hell
Has thanked: 1 time
Been thanked: 9 times
Contact:

58-84 Seat Post Install Tool

#1

Post by VintageTwin »

I see Colony made one. No. 2085-2 Heat treated tool to install top and lower bushings, complete with install-instructions.
They have the 58-84 bushings too No. 2084-2
Panacea
Senior Member
Posts: 2087
Joined: Fri May 24, 2002 1:00 am
Bikes: 64FL 99FLHR 01FXSTD
Location: Mpls. MN.
Has thanked: 72 times
Been thanked: 145 times

seat post bushing

#2

Post by Panacea »

I installed a new seat post bushing this winter as I am returning my 51 to a seat post. I was unaware there was a lower bushing, should I be looking at checking it's condition also? ahow far down the tube does it sit? Mike
VintageTwin
Senior Member
Posts: 1330
Joined: Mon Mar 11, 2002 5:11 pm
Bikes: '46 Knuck. '57 Panhead, '59 Panhead
Location: Repop Hell
Has thanked: 1 time
Been thanked: 9 times
Contact:

#3

Post by VintageTwin »

Nope. Just for '58-64. '36-57 just has the one bushing at the top. Nice to see that mfgrs. are adding to their line of '36-64 parts.
piferck2010
Junior Member
Posts: 3
Joined: Sun Apr 08, 2018 9:07 pm
Bikes: 1959 duoglide
2013 ultra classic
Location: COLCORD,ok.

Re: 58-84 Seat Post Install Tool

#4

Post by piferck2010 »

New to the site. Question . I am installing the bushings for my pogo stick. Never done this but it never had any and has alot of movement in the seat. Does the bushings press into the frame and the post slide up and down. Confusef. Sorry any help. Thanks
Chris
Post Reply

Return to “Seat”