clutch springs
-
- Member
- Posts: 81
- Joined: Thu Aug 18, 2016 1:58 pm
- Bikes: 61 pan
- Location: Uxbridge ma
- Been thanked: 6 times
clutch springs
hi everyone. I have 2 sets 0f clutch springs. the set that is shorter was in the clutch set up I ran before accident that had none of the correct parts I beleive. the taller springs were in a custom chrome package I got at swap meet a few years back and says "fits all 45's and big twins". cannot read part #. question is which set is correct for mousetrap set up? I thought I read that the short ones were but cannot find that in kb. thanks for any help tim
You do not have the required permissions to view the files attached to this post.
-
- Former member
- Senior Member
- Posts: 2784
- Joined: Tue Dec 18, 2007 2:10 pm
- Bikes: 1941/59 EL
1952 FL
1977 FLH
1994 Fatboy - Has thanked: 22 times
- Been thanked: 110 times
Re: clutch springs
The springs you want are 1-1/2" tall and just under 11/16"
Diameter. That's the measurement of the only loose springs I have. When I disassemble a clutch, I keep the pressure plate, springs, and retainer together as a unit.
Diameter. That's the measurement of the only loose springs I have. When I disassemble a clutch, I keep the pressure plate, springs, and retainer together as a unit.