Correct 51 cam cover(s)
-
- Senior Member
- Posts: 1608
- Joined: Fri Oct 03, 2008 2:57 am
- Bikes: Pan
FLHP Evo
E-H Super X
Chubble head hack
Servi-car
Topper(s)
Model 64D (Hey its got 3 wheels!) - Location: Indianapolis
- Has thanked: 406 times
- Been thanked: 367 times
Correct 51 cam cover(s)
From what I've read and seen , 51s should have 8 rib cam cover. Early has the diagonal oil passage visible, later does not . Is this correct? If so, any ideas in Vin where swithover may have occurrd? Going to look at a 51 today.
-
- Senior Member
- Posts: 2406
- Joined: Wed Jul 07, 2010 4:28 am
- Bikes: 1950Panhead
- Location: USA
- Has thanked: 1 time
- Been thanked: 366 times
Re: Correct 51 cam cover(s)
48-50 eight rib, die cast, you can see the cam oil feed from outside
51-53 eight rib, sand cast, cannot see cam feed.
Late 53 have four rib by 53FL5300
Jerry
51-53 eight rib, sand cast, cannot see cam feed.
Late 53 have four rib by 53FL5300
Jerry
-
- Senior Member
- Posts: 1608
- Joined: Fri Oct 03, 2008 2:57 am
- Bikes: Pan
FLHP Evo
E-H Super X
Chubble head hack
Servi-car
Topper(s)
Model 64D (Hey its got 3 wheels!) - Location: Indianapolis
- Has thanked: 406 times
- Been thanked: 367 times
Re: Correct 51 cam cover(s)
Thanks Jerry,
The "51" I looked at today had the diagonal oil feed. Wrong for the motor apparently, and it was chrome. Many of the original parts were on hand, but not on the roller. Neck had been boogered with too. Darn, for the money.
Thanks
The "51" I looked at today had the diagonal oil feed. Wrong for the motor apparently, and it was chrome. Many of the original parts were on hand, but not on the roller. Neck had been boogered with too. Darn, for the money.
Thanks
You do not have the required permissions to view the files attached to this post.
Re: Correct 51 cam cover(s)
Early 51s have the cam cover with the diagonal rib. Later 51s thru late 52 have the plain rib
cover.
VPH-D
cover.
VPH-D