I've got 3 cams on a shelf. 2 shovels, 1 pan. one of the shovels has an H stamped on the gear. The pan cam has no markings. Any way of measuring the lobes on these things to figure out what they are?
Ray
cam shafts ?
-
- Inactive member
- Senior Member
- Posts: 521
- Joined: Tue Feb 03, 2009 10:05 pm
- Bikes: 1938U,1949FL,1961FL,1968XL,1979FL ,1958 FL, 1965 BMW,1975 Honda CB750
- Been thanked: 14 times
Re: cam shafts ?
The "victory" cam is marked with an "H".(FLH cam) The regular FL cams were not marked-at least not any I have seen and the cams for the E models have a "61" either on the front lobe or on the gear.HTH
-
- Senior Member
- Posts: 1270
- Joined: Fri Jul 03, 2009 8:23 pm
- Bikes: 65 FLH 82 FLH
- Location: Michigan
- Been thanked: 60 times
Re: cam shafts ?
I had a "VICTORY" cam purchased new from franchised H-D dealer that had a "V" on it instead of the "H"....bosheff
-
- Inactive member
- Senior Member
- Posts: 521
- Joined: Tue Feb 03, 2009 10:05 pm
- Bikes: 1938U,1949FL,1961FL,1968XL,1979FL ,1958 FL, 1965 BMW,1975 Honda CB750
- Been thanked: 14 times
Re: cam shafts ?
Wow,I never saw one of those. Only V cam I have ever seen is an early evo cam.The early (55-6-7) FLH engines I have worked on had the "H" marked cam.Glad to hear about the variant.