breather screen & separator when installation?

Bottom End (crankcases and crankshaft)
Post Reply
BastardBoy
Member
Posts: 24
Joined: Wed Jun 03, 2009 5:14 pm
Bikes: 1952 PanHead with 1948 Frame
Location: Northville, Michigan

breather screen & separator when installation?

#1

Post by BastardBoy »

Could someone please post a picture of the breather screen & separator when installed in a Panhead? I'm putting my gear case back together and cannot figure how to install these two items? there are many different ways these can be placed in the cavity. I have searched the internet for a picture with no luck. A picture would sure help.

Thanks
pusher
Member
Posts: 23
Joined: Thu Feb 05, 2009 8:07 pm
Bikes: 1959 FLH
Location: outerspace

Re: breather screen & separator when installation?

#2

Post by pusher »

Image

26/27
breather screen fits in the top nicely
hydra74
Moderator and Panhead Register Member
Senior Member
Posts: 894
Joined: Mon Apr 03, 2006 12:50 pm
Bikes: 1943 WLC,1955 FL
Has thanked: 101 times
Been thanked: 161 times

Re: breather screen & separator when installation?

#3

Post by hydra74 »

maybe this helps
You do not have the required permissions to view the files attached to this post.
BastardBoy
Member
Posts: 24
Joined: Wed Jun 03, 2009 5:14 pm
Bikes: 1952 PanHead with 1948 Frame
Location: Northville, Michigan

Re: breather screen & separator when installation?

#4

Post by BastardBoy »

Thanks that helps a lot!
babbs
Junior Member
Posts: 1
Joined: Sat Sep 19, 2015 2:49 pm
Bikes: 1956 Panhead
Location: USA Missouri
Been thanked: 1 time

Re: breather screen & separator when installation?

#5

Post by babbs »

Do I need to run this screen in a S&S generator case ?
Post Reply

Return to “Bottom End / Crankcases / Flywheels”