Breather filter or T tap
-
- Inactive member
- Member
- Posts: 32
- Joined: Sun May 25, 2008 3:24 pm
- Location: Carolina
Breather filter or T tap
My bike is running a breather tube through the primary and out the back. The problem is it throws oil everywhere. I'd like to minimise this or eliminate it with a breather filter at the end of the hose or T tap it back to the line that goes to the oil tank. Anyone do either one of these and how does it work for you. Willy
-
- Senior Member
- Posts: 6937
- Joined: Sun Feb 10, 2002 2:30 am
- Bikes: -
- Location: Central Illinois
- Has thanked: 112 times
- Been thanked: 310 times
WillyG!
Beware that filters are notorious for collecting dirt and eventually restricting breathing altogether. They do not make oil disappear, just trap it.
Please inspect that your chain-oiler adjusting screw in the pump has a full point upon it, and is completely shut off if you are running a beltdrive.
....Cotten
Beware that filters are notorious for collecting dirt and eventually restricting breathing altogether. They do not make oil disappear, just trap it.
Please inspect that your chain-oiler adjusting screw in the pump has a full point upon it, and is completely shut off if you are running a beltdrive.
....Cotten