49 Right side case
-
panman54
- Junior Member
- Posts: 4
- Joined: Fri May 23, 2014 2:19 am
- Bikes: 1954 Pan 1981 FLTC. 1972 FLH
49 Right side case
Good evening. Can anyone tell me what the physical difference is from a 49 right side case compared to a 47 right side case. In other words, can I use my 49 to build a Knucklehead motor? Did a lot of research but can't find a solid answer. Thanks, Jim
-
1950Panhead
- Senior Member
- Posts: 2406
- Joined: Wed Jul 07, 2010 4:28 am
- Bikes: 1950Panhead
- Location: USA
- Has thanked: 1 time
- Been thanked: 366 times
Re: 49 Right side case
Only if your crazy.Can I use my 49 to build a Knucklehead motor?
Rocker arm ratios differ, cams differ, knuckle has external oil feed to head, pan (most) is internal.
It has been done before but I don't recommend it.
Reproduction knuckle engines are on Ebay if you want one.
Jerry
-
RUBONE
- Moderator
- Senior Member
- Posts: 8411
- Joined: Sat Nov 15, 2008 4:09 am
- Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
- Has thanked: 483 times
- Been thanked: 2958 times
Re: 49 Right side case
Short answer is no.
Long version is that anything is possible with enough money and perseverance.
Long version is that anything is possible with enough money and perseverance.