oil pump cover

Lubrication System (oil feed pump and scavenger pump, reservoir, filter, and lines)
Post Reply
tattoo mark
Member
Posts: 104
Joined: Sun Jan 25, 2009 2:58 pm
Bikes: 55fl,79flh,93flhtp
Location: texas

oil pump cover

#1

Post by tattoo mark »

i was wondering if anyone has a part number for my 55 oil pump cover?the cover i have has a small hole in it that looks like a port but the body does not have the same small hole,thanks
steinauge
Inactive member
Senior Member
Posts: 521
Joined: Tue Feb 03, 2009 10:05 pm
Bikes: 1938U,1949FL,1961FL,1968XL,1979FL ,1958 FL, 1965 BMW,1975 Honda CB750
Been thanked: 14 times

Re: oil pump cover

#2

Post by steinauge »

Should be marked 1170-50A.I just looked at 3 and all are so marked.If yours has a hole in it it might have come off a 65-67 model and the hole was for the vacumn primary feed tube? If so you will need to plug the hole to use it on your 55.
tattoo mark
Member
Posts: 104
Joined: Sun Jan 25, 2009 2:58 pm
Bikes: 55fl,79flh,93flhtp
Location: texas

Re: oil pump cover

#3

Post by tattoo mark »

steinauge wrote:Should be marked 1170-50A.I just looked at 3 and all are so marked.If yours has a hole in it it might have come off a 65-67 model and the hole was for the vacumn primary feed tube? If so you will need to plug the hole to use it on your 55.
mine is marked 50A-1170 also the hole is directly under the number 0 [1170] so that should not be there? casue the pump body does not have a hole in that spot.thanks
Post Reply

Return to “Lubrication System/Oil pump/Oil filter”