1949 pan oil pump parts

[ncitta]

I have a 1949 pan and need help finding the rotor and vane parts for the oil pump, any help out there ???

[Ripley/Fla]

ncitta, You can always try Fleabay. Try to buy a complete one. I found one for my bike that actually was good. Unfortunately, anything good on Fleabay usually sells for top dollar as you are bidding against the whole USA. I have also found that you have to buy two to make one of something as there is a reason the part was removed. But, if you like to search around, you may find something decent.

[SFC Diesel]

Bills Custom Cycles

7145 Columbia Blvd.
Bloomsburg, PA 17815-8635
Tele: (570) 759-9613 or (570) 759-3078
FAX: (570) 759-9684
E-mail: billm@billscustomcycles.com

I'd give them a shot, they should be able to help you out.

[ncitta]

Thanks, I bought the pump from fleabay
and I called Bills 2 days ago but they needed part numbers which I have not been able to find yet....
Thanks, Nelson

[panhead]

Part numbers:

[ncitta]

Thanks ! I really appreciate all the help ! I will post some pictures soon, I just picked up a 46 FL this Monday all there....
Thanks, Nelson

[ncitta]

I was just told today that the 49 pump looks like the 48 but does not use the rotor.

[Cotten]

Original '49 outer castings were not machined for the rotor, but still had the cavity. There is a hole to fill on the separator plate to convert to Pan flow.

It's in a Shop Dope somewhere.

....Cotten

[ncitta]

Thanks, Cotten, Every day is another day at school...
I am putting all of this in a file with the bike.
I want to do it right.