cylinders 120-48 help.
-
- Member
- Posts: 348
- Joined: Mon Jul 11, 2011 3:09 pm
- Bikes: "50 FL Panhead, '47 WL, '57 165cc
- Location: Georgia
- Has thanked: 11 times
- Been thanked: 2 times
cylinders 120-48 help.
Does anyone know anything about cylinders casted 120-48 on front and nothing on rear. were on a 49 el. Thanks
-
- Member
- Posts: 348
- Joined: Mon Jul 11, 2011 3:09 pm
- Bikes: "50 FL Panhead, '47 WL, '57 165cc
- Location: Georgia
- Has thanked: 11 times
- Been thanked: 2 times
Re: cylinders 120-48 help.
Are they one year only in 49? Are they original oem, I think so but not sure..
-
- Senior Member
- Posts: 953
- Joined: Tue Jan 08, 2008 12:32 am
- Bikes: 56 FLH, 2007 FLHRCI
- Location: Belleville, Ontario, Canada
- Has thanked: 49 times
- Been thanked: 28 times
-
- Senior Member
- Posts: 1500
- Joined: Tue Aug 03, 2010 7:10 pm
- Bikes: 1937 U big flathead, 88" stroker, dual port, big cams, pop-up pistons
- Location: Lynbrook, New York
- Has thanked: 32 times
- Been thanked: 387 times
- Contact:
Re: cylinders 120-48 help.
If there is only 1 new cylinder pair in a year, the cylinders are numbered 120-XX front and 120-XX1 rear.
If there are more new cylinders the same year, the next pair is 120-XX2 & 120-XX3.
Example: both the 45 and VL cylinders changed in 1936. The 45 is 120-36 & 120-361, the VL is 120-362 & 120-363.
This is true for many older casting numbers (not part numbers!).
If there are more new cylinders the same year, the next pair is 120-XX2 & 120-XX3.
Example: both the 45 and VL cylinders changed in 1936. The 45 is 120-36 & 120-361, the VL is 120-362 & 120-363.
This is true for many older casting numbers (not part numbers!).
-
- Senior Member
- Posts: 1036
- Joined: Sun Sep 02, 2007 7:56 pm
- Bikes: 1922 J, 1922 JD, 1937 ULH, 1946FL 1948FL, 1957FL, 1960FLH, 1965XLCH, 1995 FLHT
- Location: Hoboken, NJ
- Been thanked: 130 times
- Contact:
-
- Senior Member
- Posts: 6938
- Joined: Sun Feb 10, 2002 2:30 am
- Bikes: -
- Location: Central Illinois
- Has thanked: 112 times
- Been thanked: 310 times
Re: cylinders 120-48 help.
Folks,
As I have posted previously somewhere, my '49 EL project has OEM cylinders with no date codes.
With a very low VIN, they obviously left-overs from '48 productions.
....Cotten
As I have posted previously somewhere, my '49 EL project has OEM cylinders with no date codes.
With a very low VIN, they obviously left-overs from '48 productions.
....Cotten
-
- Member
- Posts: 348
- Joined: Mon Jul 11, 2011 3:09 pm
- Bikes: "50 FL Panhead, '47 WL, '57 165cc
- Location: Georgia
- Has thanked: 11 times
- Been thanked: 2 times
Re: cylinders 120-48 help.
Thanks, just wanted to make sure they were worth getting worked on. I thought the rear seemed to be original also. Its type of construction is identical to the front.