GUYS I WANT TO REMOVE MY LIFTER BLOCK & LIFTERS AND WAS WONDERNG IF THE BLOCKS ARE SPECIFIC TO FRONT & REAR AND INSIDE & OUTSIDE ? ALSO I BELIEVE THE LIFTERS SHOULD GO BACK IN THE SAME LOCATION AS THEY WAS REMOVED RIGHT ? GONNA GET THEM RECHROMED......
THANKS
BOB
P/S AS A SPECIAL THING I NOTED, MY ENGINE WAS ASSEMBLED WITH WHITE LITHIUM GREAST IN 1976 AND PUT INTO STORAGE UNTILL FEBUARY OF THIS YEAR. YOU KNOW THE GREASE IS STILL GOOD !!!!!! I COULDNT BELIEVE IT......
PAN LIFTER BLOCK QUESTION
-
BCOWANWHEELS
- Member
- Posts: 140
- Joined: Thu Dec 30, 2010 4:05 am
- Bikes: 1959 PAN CHOPPER
- Location: TENNESSEE
- Been thanked: 1 time
-
RUBONE
- Moderator
- Senior Member
- Posts: 8406
- Joined: Sat Nov 15, 2008 4:09 am
- Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
- Has thanked: 481 times
- Been thanked: 2956 times
Re: PAN LIFTER BLOCK QUESTION
Yes they are specific to front or rear, inside &outside. So be sure and mark the lifters well if you want them in the same holes. Make sure your chromer plugs them off too or chrome will ruin the bores.GUYS I WANT TO REMOVE MY LIFTER BLOCK & LIFTERS AND WAS WONDERNG IF THE BLOCKS ARE SPECIFIC TO FRONT & REAR AND INSIDE & OUTSIDE ? ALSO I BELIEVE THE LIFTERS SHOULD GO BACK IN THE SAME LOCATION AS THEY WAS REMOVED RIGHT ? GONNA GET THEM RECHROMED......
Robbie