Steel pushrods solid lifters, how tight?

Top End (cylinders pushrods etc.)
Post Reply
james
Senior Member
Posts: 826
Joined: Tue Nov 18, 2008 7:33 pm
Bikes: 1952 FL
2020 Honda Super Cub
Location: Estero Florida
Has thanked: 49 times
Been thanked: 57 times

Steel pushrods solid lifters, how tight?

#1

Post by james »

Went from aluminum pushrods to Mike Beams steel pushrods.
Excellent job no the pushrods Mike.
1952 Pan with solid lifters, how would you adjust them cold?
Do I adjust them snug like the aluminum or something different?

Thanks, Jim
Top
steinauge
Inactive member
Senior Member
Posts: 521
Joined: Tue Feb 03, 2009 10:05 pm
Bikes: 1938U,1949FL,1961FL,1968XL,1979FL ,1958 FL, 1965 BMW,1975 Honda CB750
Been thanked: 14 times

Re: Steel pushrods solid lifters, how tight?

#2

Post by steinauge »

Snug thumb and finger roll,cold engine .
Top
doc308
Member
Posts: 186
Joined: Mon Apr 07, 2008 8:43 pm
Bikes: 1969 XLH
2016 Softail Slim
Location: cohoes, ny
Has thanked: 1 time
Been thanked: 2 times

Re: Steel pushrods solid lifters, how tight?

#3

Post by doc308 »

I'm considering getting steel pushrods as well. How do I get in touch with Mike Beam?
Top
59Panman
Site sponsor
Site sponsor
Senior Member
Posts: 1160
Joined: Tue May 25, 2004 3:47 am
Bikes: 1959 Panhead FLH
Has thanked: 18 times
Been thanked: 152 times

Re: Steel pushrods solid lifters, how tight?

#4

Post by 59Panman »

Go to the members tab above by the search buttom and find mbskeam.
Top
Post Reply

Return to “Top End / Cylinders / Pushrods / Lifters”