Pushrod lengths

Top End (cylinders pushrods etc.)
Post Reply
49txpan
Member
Posts: 24
Joined: Wed Jun 15, 2005 3:21 am
Location: Houston

Pushrod lengths

#1

Post by 49txpan »

I am stuck in trying to finish up my engine rebuild. I have a 49 lower case but running 1964 outside oilers. The pushrods are solid. 1 of the pushrods is 9.5" long and 3 are 9.25" long. I can't find any information in my manual or on the net about which goes to which valve. Any help is appreciated.

Russ
Top
mbskeam
Senior Member
Posts: 1014
Joined: Fri Apr 18, 2003 12:26 pm
Bikes: *
Location: Sultan, WASH
Been thanked: 6 times
Contact:
Contact mbskeam

Re: Pushrod lengths

#2

Post by mbskeam »

the long one is the front exhaust

mbskeam
Top
Post Reply

Return to “Top End / Cylinders / Pushrods / Lifters”