Hi I got this cylinder from a guy and I just realized it has been damaged and ground out at the end of the arrow above the fins am I still going to be able to use this or is it junk .
Thanks Bill
Cylinders
-
- Moderator
- Senior Member
- Posts: 8406
- Joined: Sat Nov 15, 2008 4:09 am
- Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
- Has thanked: 481 times
- Been thanked: 2956 times
Re: Cylinders
Should be fine if the gasket surface is flat and smooth. If you turn it down to clean it up don't forget to shorten the fire ring an equivalent amount.