55 Front End
-
- Member
- Posts: 234
- Joined: Sat Sep 11, 2010 10:10 pm
- Bikes: 55 pan
- Location: ohio
- Has thanked: 3 times
- Been thanked: 2 times
55 Front End
which is right the lower legs with the machined flatened area for the drain or the ones with out what size are the cinch bolts ?
You do not have the required permissions to view the files attached to this post.
-
- Member
- Posts: 234
- Joined: Sat Sep 11, 2010 10:10 pm
- Bikes: 55 pan
- Location: ohio
- Has thanked: 3 times
- Been thanked: 2 times
Re: 55 Front End
or is this correct 1955 pan
You do not have the required permissions to view the files attached to this post.
-
- Senior Member
- Posts: 1270
- Joined: Fri Jul 03, 2009 8:23 pm
- Bikes: 65 FLH 82 FLH
- Location: Michigan
- Been thanked: 60 times
Re: 55 Front End
If yer talkin bout the studs that hold the bottom cap, they're 5/16". Course thread on one end, fine thread on the other....bosheff
-
- Member
- Posts: 234
- Joined: Sat Sep 11, 2010 10:10 pm
- Bikes: 55 pan
- Location: ohio
- Has thanked: 3 times
- Been thanked: 2 times
Re: 55 Front End
one set of legs has a spot ground down for i guess the drain plug so they can be used either way and the other set of legs have flat spot were the drain would be
-
- Member
- Posts: 234
- Joined: Sat Sep 11, 2010 10:10 pm
- Bikes: 55 pan
- Location: ohio
- Has thanked: 3 times
- Been thanked: 2 times
Re: 55 Front End
the legs with just the hump or rize with no ground spot are the other picture just wondering which set of legs you all think should be on the 55 pan
-
- Moderator
- Senior Member
- Posts: 3713
- Joined: Mon Dec 01, 2003 11:38 pm
- Bikes: '42 WLA X 2, '55FL, '93 Ultra Classic, '91 Fatboy, '97 883, '03 Rokon Trailbreaker, '83 GPz 750.
- Has thanked: 71 times
- Been thanked: 128 times
Re: 55 Front End
i think the ones with the flat spot are correct.
see for yourself on this unrestored example...
john
see for yourself on this unrestored example...
john