Vented fork caps
-
- Inactive member
- Member
- Posts: 92
- Joined: Mon Jul 06, 2009 6:05 pm
- Bikes: 1962 Panhead
- Location: Austin, TX
- Been thanked: 1 time
Vented fork caps
I am rebuinding my FL forks and noticed I can not blow air through the top caps where the vent hole is. Should I replace them?
-
- Moderator
- Senior Member
- Posts: 8414
- Joined: Sat Nov 15, 2008 4:09 am
- Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
- Has thanked: 484 times
- Been thanked: 2958 times
-
- Inactive member
- Senior Member
- Posts: 1401
- Joined: Sat Apr 03, 2004 5:54 am
- Bikes: -
- Location: north florida
- Been thanked: 7 times
Re: Vented fork caps
If my memory is right , there are no valves in the caps , some one cut one open & had photo's , not sure if it was a OEM , but it had nothing, but some cotton looking stuff in it ( I guess just to act as a filter or a restrictor. The ones for the adj. front end may be diff..
We had some long threads on this ,quite a while ago.
We had some long threads on this ,quite a while ago.
-
- Inactive member
- Member
- Posts: 92
- Joined: Mon Jul 06, 2009 6:05 pm
- Bikes: 1962 Panhead
- Location: Austin, TX
- Been thanked: 1 time
Re: Vented fork caps
I soaked them in solvent over the weekend and still no flow through the caps so to be on the safe side, since I just rebuilt the forks, ordered new ones.