upper fork bracket
-
- Former member
- Member
- Posts: 49
- Joined: Sun Nov 30, 2003 12:56 pm
- Bikes: 1943 WLC
1958 FL - Location: Gooi, The Netherlands
- Has thanked: 1 time
- Been thanked: 4 times
upper fork bracket
How could I see the difference between a 48-57 upper front fork bracket (pt nr 56121-48) and a 58-59 bracket (pt nr 56121-58)? I know the difference between the corresponding lower brackets, but not the difference between the upper brackets....
Thanks!
JW
Thanks!
JW
-
- Member
- Posts: 448
- Joined: Sat Oct 10, 2009 6:18 pm
- Bikes: 58 FLH 65 FLH 81 FXB 04 FLHRSI
- Location: PACIFIC NORTHWEST
- Has thanked: 1 time
- Been thanked: 37 times
Re: upper fork bracket
It is the same casting # but machined differently to match up to the relocated lower stem. The surface that the stem goes through is machined top and bottom at an angle so the bracket sits square with the cone seat on the bottom and the stem nut on the top.
-
- Former member
- Member
- Posts: 49
- Joined: Sun Nov 30, 2003 12:56 pm
- Bikes: 1943 WLC
1958 FL - Location: Gooi, The Netherlands
- Has thanked: 1 time
- Been thanked: 4 times
Re: upper fork bracket
Thanks! Can the old part be machined to fit the later lower bracket? And to what angle - how many degrees?
JW
JW
-
- Member
- Posts: 448
- Joined: Sat Oct 10, 2009 6:18 pm
- Bikes: 58 FLH 65 FLH 81 FXB 04 FLHRSI
- Location: PACIFIC NORTHWEST
- Has thanked: 1 time
- Been thanked: 37 times
Re: upper fork bracket
Yes it can but I don't know the angle required...I think this eBay part is the 58-59 fork bracket, need clearer pics.http://www.ebay.com/itm/HARLEY-DAVIDSON ... es&vxp=mtr" onclick="window.open(this.href);return false;
-
- Member
- Posts: 448
- Joined: Sat Oct 10, 2009 6:18 pm
- Bikes: 58 FLH 65 FLH 81 FXB 04 FLHRSI
- Location: PACIFIC NORTHWEST
- Has thanked: 1 time
- Been thanked: 37 times
Re: upper fork bracket
Here are a couple of 58-59 upper fork brackets on eBay....http://www.ebay.com/itm/300847542374?ss ... K:MESINDXX" onclick="window.open(this.href);return false;
-
- Member
- Posts: 448
- Joined: Sat Oct 10, 2009 6:18 pm
- Bikes: 58 FLH 65 FLH 81 FXB 04 FLHRSI
- Location: PACIFIC NORTHWEST
- Has thanked: 1 time
- Been thanked: 37 times
Re: upper fork bracket
The other one...http://www.ebay.com/itm/390525382711?ss ... 1436.l2648" onclick="window.open(this.href);return false;
-
- Former member
- Member
- Posts: 49
- Joined: Sun Nov 30, 2003 12:56 pm
- Bikes: 1943 WLC
1958 FL - Location: Gooi, The Netherlands
- Has thanked: 1 time
- Been thanked: 4 times
Re: upper fork bracket
mmmmm, these ebay brackets are both listed as 49-59 upper brackets, suggesting that there is no difference between 49-57 and 58-59 .....??...!!....
jw
jw
-
- Member
- Posts: 448
- Joined: Sat Oct 10, 2009 6:18 pm
- Bikes: 58 FLH 65 FLH 81 FXB 04 FLHRSI
- Location: PACIFIC NORTHWEST
- Has thanked: 1 time
- Been thanked: 37 times
Re: upper fork bracket
EVERYONE list them as 49-59 because of the riser spacing...they would all be the same part number if they were all the same. The pictures show the differences.
-
- Inactive member
- Senior Member
- Posts: 817
- Joined: Tue Aug 31, 2010 2:10 pm
- Bikes: 1954 Panhead
1980 Lowrider - Has thanked: 2 times
- Been thanked: 33 times
Re: upper fork bracket
es225 wrote:honestly, I don't see the difference.....
jw
There isnt any between those two.This is the other one which is the one you need.
http://www.ebay.com/itm/HARLEY-PANHEAD- ... 5e&vxp=mtr" onclick="window.open(this.href);return false;
-
- Member
- Posts: 448
- Joined: Sat Oct 10, 2009 6:18 pm
- Bikes: 58 FLH 65 FLH 81 FXB 04 FLHRSI
- Location: PACIFIC NORTHWEST
- Has thanked: 1 time
- Been thanked: 37 times
Re: upper fork bracket
Correct for 60-84.....NOT for a 58.Hog54 wrote:es225 wrote:honestly, I don't see the difference.....
jw
There isnt any between those two.This is the other one which is the one you need.
http://www.ebay.com/itm/HARLEY-PANHEAD- ... 5e&vxp=mtr" onclick="window.open(this.href);return false;