Mallory unilite and revtech dual tower coils

All ignition related articles
1958pan

Mallory unilite and revtech dual tower coils

#1

Post by 1958pan »

I have a 58 pan with a mallroy unilite distributor. Now I have rebuilt the engine,and put std dual plug heads on it. Now I bought revtech dual tower coils. When these are hooked up I get 6 ohms. Is anyone using this distributor with dual plug heads? will it work like this or is there a beter set up? Any help would be greatly appriciated. Thanks. :?:
Ron

#2

Post by Ron »

Each coil should read 3 ohms. What does it show on the coils? (ohms)
3? 6? If you tied em together and put a meter on them it will read 6 ohms.
As long as you hook them up right and get the dist. set it should work fine.
Post Reply

Return to “Ignition”