Dual plugs and single fire

[Guest]

Evening all,
I'm looking for pics/ideas for mounting two coils in a rigid frame/3.5 fatbob motorcycle. I'm going to dual plug with a single fire distributor. I run a CV carb so I don't think mounting a coil from the top motor mount will work out.

John

[Fritz]

I think Dyna makes a four tower coil. Check Jireh, they carry it for around $125. Kinda bulky, but does the trick. You can also check out the mini-coils they carry, if you wanna hide 'em.

[caschnd1]

I run two coils on my panhead. One in the stock location (fires the rear cylinder plugs) and the other mounted to the top motor mount (fires the front cylinder plugs). I also have a CV40 carb and there is no problem mounting the coil on the top motor mount and still having room for the CV enricher cable.

Here is a photo of the two coils installed:

MyPictures0809.jpg (197.32 KiB) Viewed 1666 times

Here are a couple of photos of the modified top motor mount.

DCP_1444.jpg (80.02 KiB) Viewed 1666 times

DCP_1445.jpg (71.46 KiB) Viewed 1666 times