auto advance
-
Bsimmons1
- Member
- Posts: 59
- Joined: Tue Feb 16, 2016 11:07 pm
- Bikes: 65 panhead
- Location: akron ohio
auto advance
Please correct me if I'm wrong so installing my auto advance i want the motor to be at tdc correct? this is my first time installing one and my first pan so I'm new to this bike thanks
-
RUBONE
- Moderator
- Senior Member
- Posts: 8406
- Joined: Sat Nov 15, 2008 4:09 am
- Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
- Has thanked: 482 times
- Been thanked: 2956 times
Re: auto advance
You want the timing mark in the hole when the FRONT cylinder is on compression. Then when installing the breaker unit rotate the points cam to the full advance position and install so that the mark on the cam roughly aligns with the points fiber.
-
Bsimmons1
- Member
- Posts: 59
- Joined: Tue Feb 16, 2016 11:07 pm
- Bikes: 65 panhead
- Location: akron ohio