6 volt coil
-
- Member
- Posts: 185
- Joined: Mon Jun 03, 2013 2:58 am
- Bikes: 1946 WL
- Location: Masterton, New Zealand
- Has thanked: 42 times
- Been thanked: 35 times
6 volt coil
Sorry- here I go again with another rant about crap reproduction parts. The 'new' coil I purchased has shat itself in less than 500 miles!
Who sells a decent coil? I don't mind spending money on quality parts; what pisses me off is spending good money on rubbish. I don't care if it's not original appearance, I need it to be trouble free.
Please, I would really appreciate hearing from owners who have sorted their ignition; any adaptations etc that work. Thank you, Brian
Who sells a decent coil? I don't mind spending money on quality parts; what pisses me off is spending good money on rubbish. I don't care if it's not original appearance, I need it to be trouble free.
Please, I would really appreciate hearing from owners who have sorted their ignition; any adaptations etc that work. Thank you, Brian
-
- Senior Member
- Posts: 536
- Joined: Wed Dec 14, 2011 7:04 am
- Bikes: 1948 Pan 61
1942 sv 74 x 4
1948 sv 74 x 1
1943 42U + sidecar with 6800 miles on the clock from new. - Location: South Africa
- Been thanked: 108 times
Re: 6 volt coil
Honda CD 200 coil is 6v and really hassle free ... if you can find one.
15 years ago they cost about double the price of a Taiwan repro .....
2 Small 6v coils from a DKW 2 stroke car work well too.
You have to dream up your own mounting for any of these non original coils.
Flatboy.
15 years ago they cost about double the price of a Taiwan repro .....
2 Small 6v coils from a DKW 2 stroke car work well too.
You have to dream up your own mounting for any of these non original coils.
Flatboy.
-
- Senior Member
- Posts: 575
- Joined: Wed Aug 13, 2014 8:27 pm
- Bikes: WLA
- Has thanked: 58 times
- Been thanked: 144 times
Re: 6 volt coil
Either buy an original one, or simply buy a round dual coil...they're much much better....
-
- Senior Member
- Posts: 826
- Joined: Tue Nov 18, 2008 7:33 pm
- Bikes: 1952 FL
2020 Honda Super Cub - Location: Estero Florida
- Has thanked: 49 times
- Been thanked: 57 times
Re: 6 volt coil
What I'm told the reproduction coils are wired reverse polarity.
Switch your primary wires to the coil leads.
In your case the damage is already done.
Jim
Switch your primary wires to the coil leads.
In your case the damage is already done.
Jim
Re: 6 volt coil
The round 'beer can' 6 volt coils are pretty much problem free, much more so than the 'replica' coils.
VPH-D
VPH-D
-
- Moderator
- Senior Member
- Posts: 3711
- Joined: Mon Dec 01, 2003 11:38 pm
- Bikes: '42 WLA X 2, '55FL, '93 Ultra Classic, '91 Fatboy, '97 883, '03 Rokon Trailbreaker, '83 GPz 750.
- Has thanked: 70 times
- Been thanked: 128 times
Re: 6 volt coil
I have had good luck putting new wires in original coils.
it is not as hard as it seems.
john
it is not as hard as it seems.
john
-
- Member
- Posts: 137
- Joined: Fri Dec 07, 2007 10:33 am
- Bikes: 42WLA, yamaha ybr 125
- Location: St.Petersburg(RU)
- Has thanked: 10 times
- Been thanked: 10 times
Re: 6 volt coil
1.I agree with John HD about new wire in old coil. I did it too & two
any 2 coils for 6 volt work well. but may be take more current.
wrong polarity for coil? sounds unusual.
any 2 coils for 6 volt work well. but may be take more current.
wrong polarity for coil? sounds unusual.
-
- Senior Member
- Posts: 575
- Joined: Wed Aug 13, 2014 8:27 pm
- Bikes: WLA
- Has thanked: 58 times
- Been thanked: 144 times
Re: 6 volt coil
Yes, the repop square coil should be connected backways (wire to points on the left/front lug, wires from dash to right/ back lug).
But that has nothing to do with the bad quality of the coil itself; the copperwire used inside is waay too thin and will easily break under heat/ vibration.
They're just 70-bucks crap...
But that has nothing to do with the bad quality of the coil itself; the copperwire used inside is waay too thin and will easily break under heat/ vibration.
They're just 70-bucks crap...
-
- Site sponsor
- Member
- Posts: 101
- Joined: Tue Aug 24, 2004 10:30 pm
- Bikes: ?
- Location: Soviet Canuckistan
- Been thanked: 20 times
Re: 6 volt coil
There is no polarity to a Harley coil. It doesn't matter which wire is connected to which terminal just as it doesn't matter which plug wire goes to which cylinder. Those who say polarity matters are relying on what they know about automotive coils, which are a different design. Attached are two coil schematics. The first, taken from a circa 1950 Delco Remy manual, shows the wiring of a typical automotive coil. You can see the primary and secondary are tied together on one end and hence polarity is important in that case. The second is taken from Uncle Frank's Q&A book and shows the internal wiring of a typical Harley coil. You can see the primary and secondary windings are independent of each other and so polarity doesn't matter ... Perry
- Attachments
-
- DelcoCoilSchematic.jpg (115.89 KiB) Viewed 8463 times
-
- HarleyCoilSchematic.jpg (60.57 KiB) Viewed 8463 times
-
- Member
- Posts: 87
- Joined: Thu Feb 02, 2006 1:51 am
- Bikes: 1942 WLC
1943 WLC
1975 FLH
2001 FLHR
2006 Ural patrol - Location: ontario, canada
- Been thanked: 5 times
Re: 6 volt coil
I believe that Perry is absolutely correct.
But I would like to know if anyone has taken apart one of Taiwan Tedd's coils.
Are they independent circuits as original Harley coils or are they possibly connected like the automobile coil.
Is this why connecting them backward seems to extend the life of the unit.
Is this why they started stamping the -/+ on the opposing connectors.
So maybe svkiwi can take apart that burnt out coil and see.
Todd
But I would like to know if anyone has taken apart one of Taiwan Tedd's coils.
Are they independent circuits as original Harley coils or are they possibly connected like the automobile coil.
Is this why connecting them backward seems to extend the life of the unit.
Is this why they started stamping the -/+ on the opposing connectors.
So maybe svkiwi can take apart that burnt out coil and see.
Todd
-
- Member
- Posts: 185
- Joined: Mon Jun 03, 2013 2:58 am
- Bikes: 1946 WL
- Location: Masterton, New Zealand
- Has thanked: 42 times
- Been thanked: 35 times
Re: 6 volt coil
I think Todd is correct in surmising that these repo crap coils are in fact two individual coils. Upon receipt of this coil, I removed the top in order to color match the housing with the rest of my bike, and it was apparent there was two seperate coils inside. I didn't notice any + or - markings however, so wired it in same manner as the coil it replaced. I am awaiting delivery of a couple of replacement, made in Japan, round bodied coils, I ordered one and the wife suggested I buy another, just in case, so, "Yes dear, whatever you say"!! Fingers crossed, we are in the middle of summer down here, beuatiful long days for riding, and my scoot is laid up....
-
- Senior Member
- Posts: 698
- Joined: Mon Feb 23, 2009 5:24 am
- Bikes: 1945 UL
1947 EL
1948-ish Pan
1991 FXLR
2007 FXDB Street Bob - Location: Snohomish, WA
- Has thanked: 22 times
- Been thanked: 35 times
Re: 6 volt coil
I just got my WL running after having it apart for several years. While trying to start it, it seemed that I wasn't getting a good spark, so I got a new coil from Warren at 45Restoration, and that solved things.john HD wrote:I have had good luck putting new wires in original coils.
The spark plug wires on the old coil looked like they needed replacing, so I'll discard them but hang onto the old coil unless a continuity check on both sets of windings shows that it's definitely shot.
-
- Junior Member
- Posts: 9
- Joined: Sun Jan 02, 2011 4:49 pm
- Bikes: 43 wlc
- Location: Lachenaie Qc Canada
Re: 6 volt coil
Hi John,john HD wrote:I have had good luck putting new wires in original coils.
it is not as hard as it seems.
john
I sent an OEM coil to Harbor Vintage who repair coils and they told me my coil was not repairable. Are you saying that it is possible to open a bad OEM coil and have it rewired? If so, can you tell us the procedure you used?
Thank you very much!
Bob
-
- Moderator
- Senior Member
- Posts: 3711
- Joined: Mon Dec 01, 2003 11:38 pm
- Bikes: '42 WLA X 2, '55FL, '93 Ultra Classic, '91 Fatboy, '97 883, '03 Rokon Trailbreaker, '83 GPz 750.
- Has thanked: 70 times
- Been thanked: 128 times
Re: 6 volt coil
Bob,
My comment was regarding replacing the spark pug wires not the internal wiring. I have used the method listed in any of the Harley shop manuals covering these coils. Warm it up, pull the old ones and immediately install new wires. Out of the the last 5 i have tried to repair i got 3 good ones.
The Internal wiring in these coils is immersed in tar and trying to get to the wires if you pry the top off is nearly impossible.
Get another coil and try again, there are plenty of them available and usually very inexpensive, probably because most folks won't or do not want to try replacing the spark plug wires.
All part of the fun in trying to fix these bikes!
john
My comment was regarding replacing the spark pug wires not the internal wiring. I have used the method listed in any of the Harley shop manuals covering these coils. Warm it up, pull the old ones and immediately install new wires. Out of the the last 5 i have tried to repair i got 3 good ones.
The Internal wiring in these coils is immersed in tar and trying to get to the wires if you pry the top off is nearly impossible.
Get another coil and try again, there are plenty of them available and usually very inexpensive, probably because most folks won't or do not want to try replacing the spark plug wires.
All part of the fun in trying to fix these bikes!
john
-
- Member
- Posts: 13
- Joined: Thu Jan 22, 2015 6:36 pm
- Bikes: 1940 H-D WLD 45, 1981 H-D XLH, 1987 H-D FLSTC, 1992 H-D FLHTC
- Has thanked: 15 times
Re: 6 volt coil
John, what method did you use to warm the coil in order to replace the plug wires? 6v battery, battery charger or oven?
Thanks for your input
Thanks for your input