s&s carb support?

[old52pan]

Hello all, Does anyone have a picture of how they supported an super,E on a pan motor? Using a base nut or case center bolt are the only options I can see.Thanks Panman1960

[FLH57]

DON'T KNOW MUCH ABOUT S&S , FOUND A PIC . LOOKS LIKE THEY USE SAME STUD AS LINK. DIFFERENT BRACKET. HOPE IT HELPS. LOOK AROUND ON THE NET , MIGHT FIND SOMETHING POSTED THERE.

[panhead_kicker]

I cut a length of aluminum flat stock, drilled hole at each end. Top gets bolted through the bottom s&s flange hole. The bottom gets bolted to the center case stud. I've got the long s&s manifold, so the top and bottom of the brace runs very plum. Works well.

DSCN5648.JPG

[mbskeam]

DSC_00232.jpg

DSC_00242.jpg

DSC_00262.jpg

DSC_00272.jpg

DSC_00292.jpg

DSC_00282.jpg

DSC_00302.jpg

[old52pan]

wow, thank you all for the great pics. knowing where to attach the support is half the battle. Now I get to making one. thanks again panman1960

[Panacea]

Home Vendors
Checkout

S&S Carburetor Support Adjustable Bracket

Axiom Item ID: 16-091-0558
Mfg Name: S&S
Mfg Item ID: 16-0471
For some reason the picture won't show up but this is the bracket I used and it works well, unless you also have the "jubilee"...Mike Drag Specialties Part#: 160471

Style: Adjustable

S&S

* Adjusts from 5 1/4" to 6 3/8"
* Mounts from the center case bolt between cylinders to the lower flange mount of the manifold
* Made in the U.S.A.

Email Friend List Price:$15.95
Our Price:$15.95
You Save:$0.00 (0%)

[Bill Golightly]

On my chopper