Panhead Ignition Switch
Forum rules
Please start new topics here: New Panhead and Flathead topics
Please start new topics here: New Panhead and Flathead topics
-
- Member
- Posts: 47
- Joined: Sat Jul 29, 2006 3:28 pm
- Bikes: 1956 FLH
1997 FLHTCI - Location: Eighty Four, PA
- Been thanked: 1 time
Panhead Ignition Switch
Hi Everyone,
I am changing my stock ignition switch to an electronic ignition switch. The problem is the stock switch has 5 teminals and the electronic switch has 6 terminals. Has anyone one have a simplified wiring diagram for this switch? I have the service manual with the wiring diagram in it but it's difficult to follow all the wires when I don't use 1'2 the stuff that's in the manual. So, if anyone can help me out wiring this switch I would appreciate it.
Thanks, Bill
I am changing my stock ignition switch to an electronic ignition switch. The problem is the stock switch has 5 teminals and the electronic switch has 6 terminals. Has anyone one have a simplified wiring diagram for this switch? I have the service manual with the wiring diagram in it but it's difficult to follow all the wires when I don't use 1'2 the stuff that's in the manual. So, if anyone can help me out wiring this switch I would appreciate it.
Thanks, Bill
-
- Senior Member
- Posts: 638
- Joined: Tue Mar 30, 2004 11:48 am
- Bikes: 1998 heritage springer
1959 FLH - Location: indiana, usa
- Has thanked: 17 times
- Been thanked: 19 times
Re: Panhead Ignition Switch
i tried to use a 6 lug switch in my 64 one time and the cover would not fit cause the light shroud around the 3 dash light hit the 6th screw. don't know if you'll experience that.
-
- Member
- Posts: 47
- Joined: Sat Jul 29, 2006 3:28 pm
- Bikes: 1956 FLH
1997 FLHTCI - Location: Eighty Four, PA
- Been thanked: 1 time
Re: Panhead Ignition Switch
I already found out about the dash cover hitting the switch. I had to grind away the metal seperating the oil and gen lights' Everytime I tightened down the dash nut I would blow a fuse. Took about 2 or 3 times before I figured it out. Thanks for the advice.
Bill
Bill
-
- Inactive member
- Senior Member
- Posts: 1400
- Joined: Sat Apr 03, 2004 5:54 am
- Bikes: -
- Location: north florida
- Been thanked: 7 times
Re: Panhead Ignition Switch
I have a diagram I made for my Pan's & I think I cut off the ofending term.. & I do not think I used any jumpers (I think ) . I also used circuit breakers.I will scan it & you can see if its useful to you'all .
I like the electronic switches , they are smooth & no loss of batt. voltage in between switching.
I like the electronic switches , they are smooth & no loss of batt. voltage in between switching.
-
- Member
- Posts: 76
- Joined: Tue Jan 13, 2009 12:15 am
- Bikes: 56 Pan Bobber
2008 Ducati Monster S4r - Location: Brisbane, Australia
- Been thanked: 6 times
Re: Panhead Ignition Switch
I to have a spare 6 post switch. Can someone tell me the advantages?? Also was comparing the diagram to a '57 version, where is the wire that goes to the generator, excuse my ignorance, it may be staring me in the face, thanks.
-
- Member
- Posts: 47
- Joined: Sat Jul 29, 2006 3:28 pm
- Bikes: 1956 FLH
1997 FLHTCI - Location: Eighty Four, PA
- Been thanked: 1 time
Re: Panhead Ignition Switch
Thanks Fourthgear. If you can scan your diagram that would be great. Between you and Bigincher I should be able to figure something out.
Bill
Bill
-
- Senior Member
- Posts: 2677
- Joined: Sat May 29, 2004 8:21 am
- Bikes: '31 VL, '34 VD, '45 WLA, '47 WL, '49 FL, '51 WL, '58 ST (Hummer), '71 GE (Servi)
- Location: Lonoke, Arkansas
- Has thanked: 5 times
- Been thanked: 49 times
-
- Inactive member
- Senior Member
- Posts: 1400
- Joined: Sat Apr 03, 2004 5:54 am
- Bikes: -
- Location: north florida
- Been thanked: 7 times
Re: Panhead Ignition Switch
Just remember , the color codes are not HD. They are mine, my own made wiring harness. I have another diagram that's some where , that has where I put the circuit breakers. I just haven't had time to look for it .
This one is the one I carrie on the bike.
If you look at the switch , you can see the terminal I cut off , because it got in the way of the dash or dash lights.
This is also of the Electronic ign.& CCI Gen. w/electronic reg. .You can look up your TM for Points.
Its crude ,but works . My other one is laid out better. It has to be in my notes some where.
This one is the one I carrie on the bike.
If you look at the switch , you can see the terminal I cut off , because it got in the way of the dash or dash lights.
This is also of the Electronic ign.& CCI Gen. w/electronic reg. .You can look up your TM for Points.
Its crude ,but works . My other one is laid out better. It has to be in my notes some where.