What paint do you guys suggest for the black paint on the Linkert bodies? Ive heard some people heating the body up a little before and after painting??? Any other tips, pointers, or suggestions would also be appreciated.
Cotten- do you have a link for a description on your bowl floats?
Carburetor body painting
Forum rules
Please start new topics here: New Panhead and Flathead topics
Please start new topics here: New Panhead and Flathead topics
-
- Senior Member
- Posts: 2406
- Joined: Wed Jul 07, 2010 4:28 am
- Bikes: 1950Panhead
- Location: USA
- Has thanked: 1 time
- Been thanked: 366 times
Re: Carburetor body painting
I used semi gloss black from a spray can.
Palmer, page 252 has taping tips.
Has to be clean, no heat required if 70 or above.
Jerry
Palmer, page 252 has taping tips.
Has to be clean, no heat required if 70 or above.
Jerry
-
- Senior Member
- Posts: 6938
- Joined: Sun Feb 10, 2002 2:30 am
- Bikes: -
- Location: Central Illinois
- Has thanked: 112 times
- Been thanked: 310 times
Re: Carburetor body painting
Keith!
For black bodies, I use rattlecan VHT epoxy.
Although it is not absolutely fuel-proof, it it readily available from many sources for future touch-ups.
And sorry, I have no site of my own.
My floats are black round things, machined instead of molded. Please post me direct at liberty@npoint.net for specifics.
I appreciate your interest,
....Cotten
For black bodies, I use rattlecan VHT epoxy.
Although it is not absolutely fuel-proof, it it readily available from many sources for future touch-ups.
And sorry, I have no site of my own.
My floats are black round things, machined instead of molded. Please post me direct at liberty@npoint.net for specifics.
I appreciate your interest,
....Cotten