CV jetting questions

[dragpipe]

can anyone suggest what jetting to use on a cv with acc.pump on a 53 pan in canada.
it gets between 20 and 30 celcius in the summer. live in south ontario, wish i were american

ride on

[caschnd1]

Drag pipe,

I keep jetting information for CVs on my photo web site. You can find them here:

PANHEAD:

Slow Jet: #50
Main Jet: #175
Needle Jet: 0.115
Needle Type: N86E
Idle Mix Location: 2 turns

Engine Specs:
Displacement: 74c.i. +0.060
Cam: Crane 296A
Compression: 8.5:1
Exhaust: Free Flowing (upsweeps with 22" baffles)

SHOVELHEAD (recommendations from those who have done it, not my personal experience):

Same as Panhead except the following:

Main Jet: #170

KNUCKLEHEAD (recommendations from those who have done it, not my personal experience):

Same as Panhead except the following:

Slow Jet: #48
Main Jet: #180




Helpful chart showing the dimensions for different CV40 needles:




I run this jetting year round. Our winter is probably closer to your summer but this jetting works fine winter or summer here.

-Craig

[dragpipe]

ok thanks,
I figured it would be the same. a starting point anyway..that sites great ,,has everything you would need to know... the snow is still falling here so itll be some time yet before i can ride.
thanks bud