56 fl brake pedal
Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
Please do not start new topics here, but here: New Panhead and Flathead topics
-
- Member
- Posts: 74
- Joined: Mon Dec 27, 2010 2:19 am
- Bikes: 56 Hydra Glide
72 Sportster
70 R60/5 with sidehack
2018 Road King
95 Hugger - Location: New York
- Has thanked: 1 time
- Been thanked: 7 times
56 fl brake pedal
Hello all,
New member as well as new pan owner- 56 FL, probably 95% stock down to the original bags, but unfortunately repainted back in the early 70's.
I have alot of questions, but I thought I'd start with something that might save my ass at some point.
The brake pedal does not stop (rest) vertically as I see on all other pans and knucks. It flops back aways, much further than I would think comfortable or safe, and more than once I have been searching for it coming to a light. I don't even want to think about an emergency stop.
The linkage was extended all the way out when I got it, still not enough, and I'm uncomfortable only catching minimal threads on the clevis' anyway when they were all out. There is no stock return spring on the pedal, which would just make the situation worse anyway. Lots of free play on the pedal, again, more than I'm comfortable with.
Cross tube seems snug, rear brake arm also. Linkages appear stock. Linkage in correct hole on brake pedal lever.
I'm taking it off the road for the winter (expecting another 5-6" of snow tonight) for a general overhaul, tires, wheel work, cleaning, etc. Does anyone have any idea where to zero in on this problem as I pull things apart? I've found nothing in the forums or anywhere in the manuals or web, so I'm really open for suggestions.
Thanks in advance. This is a great site-
Best
Gregg
New member as well as new pan owner- 56 FL, probably 95% stock down to the original bags, but unfortunately repainted back in the early 70's.
I have alot of questions, but I thought I'd start with something that might save my ass at some point.
The brake pedal does not stop (rest) vertically as I see on all other pans and knucks. It flops back aways, much further than I would think comfortable or safe, and more than once I have been searching for it coming to a light. I don't even want to think about an emergency stop.
The linkage was extended all the way out when I got it, still not enough, and I'm uncomfortable only catching minimal threads on the clevis' anyway when they were all out. There is no stock return spring on the pedal, which would just make the situation worse anyway. Lots of free play on the pedal, again, more than I'm comfortable with.
Cross tube seems snug, rear brake arm also. Linkages appear stock. Linkage in correct hole on brake pedal lever.
I'm taking it off the road for the winter (expecting another 5-6" of snow tonight) for a general overhaul, tires, wheel work, cleaning, etc. Does anyone have any idea where to zero in on this problem as I pull things apart? I've found nothing in the forums or anywhere in the manuals or web, so I'm really open for suggestions.
Thanks in advance. This is a great site-
Best
Gregg
You do not have the required permissions to view the files attached to this post.
-
- Senior Member
- Posts: 1035
- Joined: Sun Sep 02, 2007 7:56 pm
- Bikes: 1922 J, 1922 JD, 1937 ULH, 1946FL 1948FL, 1957FL, 1960FLH, 1965XLCH, 1995 FLHT
- Location: Hoboken, NJ
- Been thanked: 128 times
- Contact:
Re: 56 fl brake pedal
Sounds like the pivet pin which is riveted to the mounting plate is loose. This is not uncommon. You can ether resquash the rivet or tack weld it. If you choose to weld. Be carfull that the pivet is square to the plate. I got a small box of them here where they were welded at an angle. Hope this helps. Bob L
-
- Senior Member
- Posts: 2405
- Joined: Wed Jul 07, 2010 4:28 am
- Bikes: 1950Panhead
- Location: USA
- Has thanked: 1 time
- Been thanked: 366 times
Re: 56 fl brake pedal
Gregg,
Pedal should be vertical or slightly forward, lever on left side of cross shaft rests on trans plate.
Check rear brake rod adjustment and brake shoes, replace spring if missing.
Jerry
Pedal should be vertical or slightly forward, lever on left side of cross shaft rests on trans plate.
Check rear brake rod adjustment and brake shoes, replace spring if missing.
Jerry
-
- Senior Member
- Posts: 1261
- Joined: Wed Dec 31, 2008 2:29 am
- Bikes: H-D
- Location: Western Australia
- Has thanked: 31 times
- Been thanked: 310 times
Re: 56 fl brake pedal
Welcome to the forum, Gregg. The shot below may be of some help and it's one from Chris Haynes' photo collection which I edited. It's the 1952 FL prototype but I think the brake setup remained the same through 1957. Eric
You do not have the required permissions to view the files attached to this post.
-
- Member
- Posts: 74
- Joined: Mon Dec 27, 2010 2:19 am
- Bikes: 56 Hydra Glide
72 Sportster
70 R60/5 with sidehack
2018 Road King
95 Hugger - Location: New York
- Has thanked: 1 time
- Been thanked: 7 times
Re: 56 fl brake pedal
Thanks all
The setup is exactly like the pic, except for the return spring visible under the floorboard and my pedal is probably far enough left to line up with the rear tappet guide block.
Bob, when you say the pivet pin that is riveted to the mounting plate, do you mean the brake pedal mounting plate (b2 in the manual exploded pic) and the stud (or sleeve?)that shows coming off it? Des this have some sort of positive stop to keep the pedal from going back?
I'll be out pulling it off later today, then maybe it will be clear to me. I don't remember seeing anything riveted or welded when I pulled it apart a few weeks ago, but I will check more closely.
Thanks Gregg
The setup is exactly like the pic, except for the return spring visible under the floorboard and my pedal is probably far enough left to line up with the rear tappet guide block.
Bob, when you say the pivet pin that is riveted to the mounting plate, do you mean the brake pedal mounting plate (b2 in the manual exploded pic) and the stud (or sleeve?)that shows coming off it? Des this have some sort of positive stop to keep the pedal from going back?
I'll be out pulling it off later today, then maybe it will be clear to me. I don't remember seeing anything riveted or welded when I pulled it apart a few weeks ago, but I will check more closely.
Thanks Gregg
-
- Former member
- Senior Member
- Posts: 2789
- Joined: Tue Dec 18, 2007 2:10 pm
- Bikes: 1941/59 EL
1952 FL
1977 FLH
1994 Fatboy - Has thanked: 22 times
- Been thanked: 110 times
Re: 56 fl brake pedal
What Bob is saying is that the pedal pivot pin is 'peened' or 'swaged' to the back of the backing plate, presumably in a large stamp mill. They do often come loose, and you'll find a lot of these with a little weld on the back as a repair, to tighten it up.
I've got a couple with a loose pin, and have been mulling over the best way to repair them without a weld-- possibly restamp them, but where the heck do you find a place that can do such work? Sorry, that's another subject....
Here's a pic of the back of the backing plate showing how the pivot pin is attached.
I've got a couple with a loose pin, and have been mulling over the best way to repair them without a weld-- possibly restamp them, but where the heck do you find a place that can do such work? Sorry, that's another subject....
Here's a pic of the back of the backing plate showing how the pivot pin is attached.
You do not have the required permissions to view the files attached to this post.
-
- Senior Member
- Posts: 1035
- Joined: Sun Sep 02, 2007 7:56 pm
- Bikes: 1922 J, 1922 JD, 1937 ULH, 1946FL 1948FL, 1957FL, 1960FLH, 1965XLCH, 1995 FLHT
- Location: Hoboken, NJ
- Been thanked: 128 times
- Contact:
Re: 56 fl brake pedal
Tom, I don't think this is the problem he's having but a while back Tom Faber told me they did that rivet with a 50 ton orbital riveter (What ever that is?). Obviously You going to have to make the tool. I would heat that sucker up cherry red and wack away with a lump hammer. The weld thing is probley a better bet, you just got to make sure the pin is square to the plate. No second chances here. Bob L
-
- Former member
- Senior Member
- Posts: 2789
- Joined: Tue Dec 18, 2007 2:10 pm
- Bikes: 1941/59 EL
1952 FL
1977 FLH
1994 Fatboy - Has thanked: 22 times
- Been thanked: 110 times
Re: 56 fl brake pedal
Bob, I might've misread the question, but thanks for telling me about the 50-ton orbital riveter. I guess I'll have to make a large rivet set (or find one that size) and do as you suggest--- sounds reasonable to me.
-
- Senior Member
- Posts: 1035
- Joined: Sun Sep 02, 2007 7:56 pm
- Bikes: 1922 J, 1922 JD, 1937 ULH, 1946FL 1948FL, 1957FL, 1960FLH, 1965XLCH, 1995 FLHT
- Location: Hoboken, NJ
- Been thanked: 128 times
- Contact:
Re: 56 fl brake pedal
Tom, I got ten of these things laying around waiting for me to make the tool. Maybe the next couple of weeks, it's going to take two tools. A base support that's solid and a set, I would make the set a little under the size of the original. This will drive down the meat on the sides of existing dome. Simple tool steel and oil quench hardening should do it. Bob
-
- Former member
- Senior Member
- Posts: 2789
- Joined: Tue Dec 18, 2007 2:10 pm
- Bikes: 1941/59 EL
1952 FL
1977 FLH
1994 Fatboy - Has thanked: 22 times
- Been thanked: 110 times
Re: 56 fl brake pedal
Bob, I'd really appreciate seeing that when you get it done, and fix your first few pivot pedals. Most all you find these days are loose....!
-
- Member
- Posts: 74
- Joined: Mon Dec 27, 2010 2:19 am
- Bikes: 56 Hydra Glide
72 Sportster
70 R60/5 with sidehack
2018 Road King
95 Hugger - Location: New York
- Has thanked: 1 time
- Been thanked: 7 times
Re: 56 fl brake pedal
I had a little time today to start exploring. Pivot pin is tight in the mount. I was able to extend the rear rod enough to hold the brake pedal in the correct position, but as a result, the brake engages way too late.
Jerry mentioned that the lever on left side of cross shaft rests on transmission plate. Does this provide the positive stop that I'm looking for (if it exists at all?)? It's not easy to see down there. I guess I'll be pulling the primary cover and back to take a look.
Gregg
Jerry mentioned that the lever on left side of cross shaft rests on transmission plate. Does this provide the positive stop that I'm looking for (if it exists at all?)? It's not easy to see down there. I guess I'll be pulling the primary cover and back to take a look.
Gregg
-
- Inactive member
- Member
- Posts: 110
- Joined: Thu Feb 18, 2010 10:43 pm
- Bikes: 43 wlc ,1990 xl1200 ,73 shovel
- Location: devon england
- Has thanked: 2 times
- Been thanked: 1 time
Re: 56 fl brake pedal
could you use the ,brake lock rod stop, adjusted so it bears against the rear foot board mounting to provide a method of postioning the pedal from retuning further than is comfortable or safe?
-
- Inactive member
- Member
- Posts: 400
- Joined: Mon Jan 27, 2003 1:25 pm
- Bikes: *
- Been thanked: 4 times
Re: 56 fl brake pedal
This is something I have been dealing with ever since I got the Pan in ‘73. With everything well-adjusted my brake pedal would flop back past vertical and, as Bob recounted, be hard to find. I have corrected it by installing a weak spring off the pedal forward to the floor board stud. This keeps the pedal at a good forward angle without exerting enough pull to engage the brake. Pretty “riggy†solution but it works for me.
I also had the pivot problem, it was loose on the backing plate, but a couple weld spots corrected that. Another problem I encountered when I mounted a Bendix on my STD heads was that the air cleaner stuck out a couple of inches more than with the Linkert. This made working the brake pedal a bit awkward so I made an extender that moved the pedal pad out about two inches for better foot placement.
King
I also had the pivot problem, it was loose on the backing plate, but a couple weld spots corrected that. Another problem I encountered when I mounted a Bendix on my STD heads was that the air cleaner stuck out a couple of inches more than with the Linkert. This made working the brake pedal a bit awkward so I made an extender that moved the pedal pad out about two inches for better foot placement.
King
-
- Moderator
- Senior Member
- Posts: 8407
- Joined: Sat Nov 15, 2008 4:09 am
- Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
- Has thanked: 482 times
- Been thanked: 2957 times
Re: 56 fl brake pedal
I have always had the best adjustment and pedal position by using the front rod adjustment to place the pedal in the right location and the rear rod adjustment to set the free play in the whole system. The return spring is a very necessary piece in the whole thing as it not only keeps the pedal in position, it applies tension to the whole system working against the rear brake springs to make it all work. Because of the pedal hole location it is crucial to get the front rod adjusted where the pedal does not fall back behind center in its relaxed position. Also, is your rear brake arm installed correctly? It can go on in reverse which pushes everything forward (and consequently the pedal back!) so it needs to be right as well. When the rear rod is adjusted it puts pressure against the front spring which tensions the system. The front spring is stronger than the brake shoe springs, allowing the rear rod to adjust the cam against the brake spring tension for actuation freeplay and the pedal sits where it is supposed to! Merely my experience, take it as you will.
Robbie
Robbie
-
- Member
- Posts: 210
- Joined: Wed Oct 17, 2007 6:34 pm
- Bikes: 1936 VLH, 1936 VD, 1956 FLH, 1956 KHK,
- Has thanked: 3 times
- Been thanked: 39 times