The power to stop you

Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
Post Reply
dirtydistrict
Member
Posts: 121
Joined: Sun Mar 16, 2003 12:00 pm
Bikes: 2010 road king at the moment. Won't last long
Location: CORNAS FRANCE

The power to stop you

#1

Post by dirtydistrict »

Hi guys, wish to retro fit my 58 duo for a 57 hydra but want to keep the juice rear brake drum; any experiment of this ??
Top
59pan
Inactive member
Member
Posts: 40
Joined: Sun Jun 09, 2002 12:46 pm
Bikes: -
Location: dallas

Re: The power to stop you

#2

Post by 59pan »

I had to weld a tab on the lower frame to accommodate the backing plate. Other than that no problems.
Top
dirtydistrict
Member
Posts: 121
Joined: Sun Mar 16, 2003 12:00 pm
Bikes: 2010 road king at the moment. Won't last long
Location: CORNAS FRANCE

Re: The power to stop you

#3

Post by dirtydistrict »

Thanx 59, did you weld a small tab for the break line connection ?
Top
59pan
Inactive member
Member
Posts: 40
Joined: Sun Jun 09, 2002 12:46 pm
Bikes: -
Location: dallas

Re: The power to stop you

#4

Post by 59pan »

Sorry for the tardy reply. No just for the mounting of the backing plate stud. The hydraulic line lays between the frame and the plate. good luck. mine works well especially since I put a wilwood front disc on as well.
Top
Post Reply

Return to “Brakes”