Hi,
I heard that DOT 5 brake fluid will disintegrate Teflon thread wrap and that brakeline connections should be installed dry. Is this true? Anyone experience disintegration?
Mike in Pgh
DOT 5 bad for teflon threadwrap
Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
Please do not start new topics here, but here: New Panhead and Flathead topics
-
- Inactive member
- Member
- Posts: 51
- Joined: Tue May 04, 2004 8:05 am
-
- Inactive member
- Senior Member
- Posts: 1401
- Joined: Sat Apr 03, 2004 5:54 am
- Bikes: -
- Location: north florida
- Been thanked: 7 times
Re: DOT 5 bad for teflon threadwrap
I haven't found any thing yet that will break down Teflon tape ,not even heat ,but I'm sure there is some thing that will . I always use TT. on all threaded fittings for fluids , even flared fitting threads . Some don't and thats OK too.
Re: DOT 5 bad for teflon threadwrap
pghmike-
Dot 5 is fully synthetic & non-hydroscopic, & as such won't even harm finished paint.. I have never had a problem w/teflon & Dot 5 (I use the paste though. (& I only use Dot 5). Dot 3 will burn paint in short order.. (but we all know that)
Dot 5 is fully synthetic & non-hydroscopic, & as such won't even harm finished paint.. I have never had a problem w/teflon & Dot 5 (I use the paste though. (& I only use Dot 5). Dot 3 will burn paint in short order.. (but we all know that)