Anybody have any recommendations for thread sealer? Some of my oil fittings are leaking a bit. Not much, but I'm wondering if I can improve them.
I've tried the teflon paste and it seems to be hit-or-miss, plus I don't think it's very effective unless you get the threads perfectly clean.
I've also tried the teflon tape, which seems to work better, but I hate the thought of that tape coming loose and getting into the oil passages.
Any suggestions based on experience?
Thread Sealer
Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
Please do not start new topics here, but here: New Panhead and Flathead topics
-
- Senior Member
- Posts: 953
- Joined: Tue Jan 08, 2008 12:32 am
- Bikes: 56 FLH, 2007 FLHRCI
- Location: Belleville, Ontario, Canada
- Has thanked: 49 times
- Been thanked: 28 times
-
- Senior Member
- Posts: 6938
- Joined: Sun Feb 10, 2002 2:30 am
- Bikes: -
- Location: Central Illinois
- Has thanked: 112 times
- Been thanked: 310 times
Re: Thread Sealer
Steve!
I am currently using Gasgacinch for light-duty applications that may need to be cleaned easily,..
And Pliobond where solvent and heat resistance are critical.
They have the advantage of a vintage appearance, if nothing else.
Please remember, however, that threads can only be expected to seal when they are tapered pipe threads (npt).
All other designs depend upon either a compression taper, or a rubber grommet.
Any sealer is a band-aid.
....Cotten
I am currently using Gasgacinch for light-duty applications that may need to be cleaned easily,..
And Pliobond where solvent and heat resistance are critical.
They have the advantage of a vintage appearance, if nothing else.
Please remember, however, that threads can only be expected to seal when they are tapered pipe threads (npt).
All other designs depend upon either a compression taper, or a rubber grommet.
Any sealer is a band-aid.
....Cotten
-
- Inactive member
- Junior Member
- Posts: 4
- Joined: Mon Oct 31, 2011 3:15 pm
- Bikes: 58 Pan Chop "The Atomic Punk"
-
- Member
- Posts: 348
- Joined: Sat Jan 30, 2010 8:29 pm
- Bikes: 1948 FL
1959 FLH chopper
1966 Norton P-11
1968 XLCH
1976 FXE - Location: N/W ohio
- Has thanked: 3 times
- Been thanked: 32 times