Cotten & The Horse
Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
Please do not start new topics here, but here: New Panhead and Flathead topics
-
- Member
- Posts: 61
- Joined: Sat Feb 26, 2011 11:39 pm
- Bikes: 1968FLH
1988 FLHT
1968 FLH - Location: Ontario Canada
- Has thanked: 2 times
- Contact:
Cotten & The Horse
Hi Cotten,
Saw your plug in the lastest issue of the horse regarding the carb for one of their feature bikes.
Nice
Congrats
Wayne
Saw your plug in the lastest issue of the horse regarding the carb for one of their feature bikes.
Nice
Congrats
Wayne
-
- Senior Member
- Posts: 6937
- Joined: Sun Feb 10, 2002 2:30 am
- Bikes: -
- Location: Central Illinois
- Has thanked: 112 times
- Been thanked: 310 times
Re: Cotten & The Horse
Wayne!
I'm out of touch with hardcopy magazines (I hardly even read the AMCA's),
and very much out of touch with the Horse after they banned me from their forum a decade ago.
Who's machine is it?
Did they cite "Cotton", or Liberty?
....Cotten
I'm out of touch with hardcopy magazines (I hardly even read the AMCA's),
and very much out of touch with the Horse after they banned me from their forum a decade ago.
Who's machine is it?
Did they cite "Cotton", or Liberty?
....Cotten
-
- Member
- Posts: 61
- Joined: Sat Feb 26, 2011 11:39 pm
- Bikes: 1968FLH
1988 FLHT
1968 FLH - Location: Ontario Canada
- Has thanked: 2 times
- Contact:
Re: Cotten & The Horse
HI Cotten,
I'll check when I get home to get the particulars.
I know that they mentioned you by name and Liberty.
later
Wayne
I'll check when I get home to get the particulars.
I know that they mentioned you by name and Liberty.
later
Wayne
-
- Member
- Posts: 61
- Joined: Sat Feb 26, 2011 11:39 pm
- Bikes: 1968FLH
1988 FLHT
1968 FLH - Location: Ontario Canada
- Has thanked: 2 times
- Contact:
Re: Cotten & The Horse
HI Cotten
You and your shop are mentioned by name but no phone number or address etc.
The bike is a 38 Knuck and you did a "Sleeper" M36 Linkert carb for it
later
Wayne
You and your shop are mentioned by name but no phone number or address etc.
The bike is a 38 Knuck and you did a "Sleeper" M36 Linkert carb for it
later
Wayne
-
- Senior Member
- Posts: 6937
- Joined: Sun Feb 10, 2002 2:30 am
- Bikes: -
- Location: Central Illinois
- Has thanked: 112 times
- Been thanked: 310 times
Re: Cotten & The Horse
Wayne!
"Sleeper"?
I've fondled too many M36s for it ring a bell.
I picked up Horse up for a second while I stood in line at at the quickymart;
Didn't have time to find it, but I did determine quickly that it is just as well that my credits were limited: The format of the rag misses the bulk of my 'customer demographic'.
Thanks for the heads-up!
....Cotten
"Sleeper"?
I've fondled too many M36s for it ring a bell.
I picked up Horse up for a second while I stood in line at at the quickymart;
Didn't have time to find it, but I did determine quickly that it is just as well that my credits were limited: The format of the rag misses the bulk of my 'customer demographic'.
Thanks for the heads-up!
....Cotten
-
- Member
- Posts: 56
- Joined: Mon Jun 02, 2008 5:22 pm
- Bikes: *
Re: Cotten & The Horse
Cotten, it was my 1938 frankenstein bike, you did the carb for me a couple of years ago, I believe in giving credit where it belongs, I hate reading about bike builds where the owner claims he did everything! SO,,, I list everyone that I can recall in my feeble memory bank and give them credit where it is due, I had a lot of fun with that particular build as you can tell.
It was a lot of hours with lots of friends visiting during the project, everyone had an opinion, I was selective about the ones I acted upon.
Regards, Nelson
It was a lot of hours with lots of friends visiting during the project, everyone had an opinion, I was selective about the ones I acted upon.
Regards, Nelson
-
- Senior Member
- Posts: 6937
- Joined: Sun Feb 10, 2002 2:30 am
- Bikes: -
- Location: Central Illinois
- Has thanked: 112 times
- Been thanked: 310 times
Re: Cotten & The Horse
Nelson!
I appreciate your appreciation!
Forgive me if I seem apprehensive toward hard-copy publications,
but they always seem to come back upon me, somehow.
That is just one of the reasons why I enjoy this interactive community!
(Especially the edit function.)
Thanks,
...Cotten
I appreciate your appreciation!
Forgive me if I seem apprehensive toward hard-copy publications,
but they always seem to come back upon me, somehow.
That is just one of the reasons why I enjoy this interactive community!
(Especially the edit function.)
Thanks,
...Cotten
-
- Member
- Posts: 61
- Joined: Sat Feb 26, 2011 11:39 pm
- Bikes: 1968FLH
1988 FLHT
1968 FLH - Location: Ontario Canada
- Has thanked: 2 times
- Contact:
Re: Cotten & The Horse
Hello Nelson,
That is a nice bike. Hope you still are enjoying it.
Cotten, the Horse has some interesting stuff once in a while (Nelson's bike for example) however a lot of the bikes are hacked together J brand stuff that look unsafe to stand beside let alone ride.
My $.02 anyway
Cheers
Wayne
That is a nice bike. Hope you still are enjoying it.
Cotten, the Horse has some interesting stuff once in a while (Nelson's bike for example) however a lot of the bikes are hacked together J brand stuff that look unsafe to stand beside let alone ride.
My $.02 anyway
Cheers
Wayne
-
- Member
- Posts: 56
- Joined: Mon Jun 02, 2008 5:22 pm
- Bikes: *
Re: Cotten & The Horse
Thanks Wayne, That build was about as radical as I have done, It won 2nd place in the period modified class at(AMCA) Eustis, Florida this year, The only thing that kept it from 1st place was the late model sportster rear brake pedal, (it fit perfectly)...
I do ride mine so it is hard for me to keep any 100% ,
Regards, Nelson
I do ride mine so it is hard for me to keep any 100% ,
Regards, Nelson