Cad Plating, where to get it done?
Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
Please do not start new topics here, but here: New Panhead and Flathead topics
-
- Inactive member
- Member
- Posts: 12
- Joined: Fri Jul 23, 2010 3:43 pm
- Bikes: 1946 U, Police bike
1960 Hardtail Bobber - Location: Hartland, WI.
Cad Plating, where to get it done?
I am rebuilding a Pan motor and need to find a shop that does Cad Plating. I'm looking for real Cad, not copy cad or zink. Any help?
-
- Junior Member
- Posts: 8
- Joined: Sat Jul 14, 2007 8:34 pm
- Bikes: 1953G,1958 FLH, 1960 FLH, 1964 FL, 1968 FLH, 1989 FLHS, 1997 FLHRI, 2016 FLHTKSE
- Location: Mandeville, Louisiana
Re: Cad Plating, where to get it done?
I used S&H Chrome Plating & Powder Coating, 817 Madison Industrial Rd., Madison, TN 37115. Phone number is (615) 865-0100. Their website is http://www.s-hchrome.com" onclick="window.open(this.href);return false;. They did the chrome and cadmium plating for me when I restored by 64 FL and they did a great job.
-
- Inactive member
- Junior Member
- Posts: 1
- Joined: Fri Oct 15, 2010 7:01 pm
- Bikes: 1951 FL
1980 FLHS - Location: dousman, wi
Re: Cad Plating, where to get it done?
Deluxe HD Restorations
130 Henry St
Dousman Wi 53118
262.244.0965
We offer real cad plating for your restoration needs. Make sure your parts are as clean as you can get them. Bead blast is best, but even a soft wire brush works to get most of the gunk off. Dress the hex or slots on screws nut and bolts to remove any imperfections. If you are sending them in the mail or ups, lay them out and take a digital picture of them and send it to us or include it in the box. When we get them, we also take pictures before and after. We also offer Parkerizing and other restoration services.
Cass Kuzba
Deluxe HD Restorations
262.244.0965
130 Henry St
Dousman Wi 53118
262.244.0965
We offer real cad plating for your restoration needs. Make sure your parts are as clean as you can get them. Bead blast is best, but even a soft wire brush works to get most of the gunk off. Dress the hex or slots on screws nut and bolts to remove any imperfections. If you are sending them in the mail or ups, lay them out and take a digital picture of them and send it to us or include it in the box. When we get them, we also take pictures before and after. We also offer Parkerizing and other restoration services.
Cass Kuzba
Deluxe HD Restorations
262.244.0965
-
- Former member
- Senior Member
- Posts: 2789
- Joined: Tue Dec 18, 2007 2:10 pm
- Bikes: 1941/59 EL
1952 FL
1977 FLH
1994 Fatboy - Has thanked: 22 times
- Been thanked: 110 times
Re: Cad Plating, where to get it done?
That's good to know, I also have many parts for re-cadding and parkerizing. Cass, do you have any kind of pricing chart? PM me if you like...